Standard Tape Light IP54 100Ft

Product Overview

STL-UWW-100 is a 100-foot roll of IP54-rated, standard-grade 24V tape light in 2700K warm white. It is specified at 2.19 watts per foot with a listed CRI of 96+ and a listed lumen value of 146 (value provided in product data).

The roll is supplied with a TL-CONKIT (Y0409676) 10 mm 2‑pin connector with a 6' cable to assist field connections.

Key Features

• 100 ft roll (SKU: STL-UWW-100)
• 2700K warm white
• 2.19 W per foot
• 146 lumens (listed value in product data)
• CRI 96+ (listed value in product data)
• 24V DC rated
• IP54 ingress protection (splash-resistant)
• Includes TL-CONKIT Y0409676 — 10 mm 2‑pin connector with 6' cable

Intended use

This product is a 100-foot roll of standard-grade LED tape light in 2700K. The product data lists an IP54 rating, making it resistant to limited dust ingress and splashing water; use decisions should reflect that level of protection.

• Linear lighting runs where a warm white appearance is desired
• Applications where splash resistance (IP54) is acceptable

Performance and outputs

Product data lists power at 2.19 W per foot, a lumen value of 146, and CRI 96+. Color temperature is specified as 2700K for this SKU.

• Power: 2.19 W/ft (listed)
• Light output: 146 lm (listed)
• Color: 2700K
• CRI: 96+ (listed)

Ingress protection and location suitability

The listed IP54 rating indicates protection against limited dust ingress and splashing water. It is not listed for continuous immersion or underwater use.

• Ingress protection: IP54 — splash-resistant, limited dust protection
• Not rated for continuous submersion

Connections and included accessory

The product data indicates a supplied TL-CONKIT (Y0409676): a 10 mm 2‑pin connector with a 6' cable. The tape light is specified for 24V DC operation; a compatible 24V power supply/driver and any control accessories are not listed as included and should be sourced separately.

• Included: TL-CONKIT Y0409676 — 10 mm 2‑pin connector with 6' cable
• Requires a compatible 24V DC driver (sold separately)

Size and packaging details

Product data lists the roll length as 100 ft, a product width value of 0.03 (units listed in source), and a packaged weight of approximately 1.6 lb.

• Length: 100 ft
• Width: 0.03 (as listed in product data)
• Packaged weight: 1.6 lb

Before You Order

Confirm the SKU (STL-UWW-100) and required quantity. The product data indicates the tape is 24V and that a connector is supplied; a compatible 24V driver and any controls are not included.

• This SKU is 2700K; other 100 ft variants with different CCTs are listed separately—verify color temperature before ordering.
• Driver and dimming controls are not included; specify a compatible 24V driver and controls separately.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Standard Tape Light IP54 100Ft. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.