B220HH - Siemens 20 Amp 2 Pole 120/240V Bolt-On Molded Case Circuit Breaker Type BL

Product Overview

Siemens B220HH is a 20 amp, 2‑pole, 120/240V bolt‑on molded case circuit breaker in Type BL form factor.

This listing is for a new B220HH breaker. Contact Lumera Electric to request a quote for pricing and availability.

Key Features

• 20 amp interrupting device, 2 poles for 120/240V systems
• Bolt‑on (BL) molded case construction
• Manufacturer: Siemens
• Condition: New

Function and intended use

The B220HH is a two‑pole molded case circuit breaker designed to provide overcurrent protection for branch circuits in 120/240 volt electrical systems. As a 2‑pole device, it simultaneously disconnects both hot conductors when tripped.

• Protects branch circuits up to 20 amps per pole
• Provides simultaneous interruption of both poles for multi‑wire branch circuits

Electrical ratings

This specific SKU is rated at 20 amps and intended for use in 120/240V systems. Use the breaker only within its marked voltage and ampere ratings and in accordance with applicable electrical codes.

• Ampere rating: 20 A
• Poles: 2 (two‑pole)
• Voltage: 120/240 V (line‑to‑line and line‑to‑neutral configurations as appropriate for two‑pole breakers)

Mounting and mechanical form factor

The B220HH is a bolt‑on (Type BL) molded case breaker. Bolt‑on breakers require a panel or enclosure designed to accept BL‑style mounting and corresponding bus/terminal hardware.

• Mounting: Bolt‑on (Type BL)
• Molded case construction

Ordering and verification

Confirm the full model number (B220HH) and that a bolt‑on Type BL breaker is compatible with your panel before ordering. This listing represents the single SKU B220HH as a new unit.

• Manufacturer: Siemens
• Part number/SKU: B220HH
• Condition: New

Before You Order

Confirm the model number and that a bolt‑on Type BL breaker fits your panelboard. Verify electrical ratings and local code requirements before installation.

• Verify panel compatibility with Type BL (bolt‑on) breakers
• Confirm system voltage and load requirements match 120/240 V, 20 A rating
• Contact Lumera Electric to request a quote for pricing and availability

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for B220HH - Siemens 20 Amp 2 Pole 120/240V Bolt-On Molded Case Circuit Breaker Type BL. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.