Orbit 1-1/4 in EMT Snap-Close Conduit Clamp F20M4I

Product Overview

The Orbit F20M4I is a snap-close conduit clamp sized for 1-1/4 in EMT. It uses a push-in snap-close design for conduit attachment and is made from spring steel with a pre-galvanized (zinc) finish.

The clamp includes a 1/4 in threaded hole to accept 1/4 in rod or compatible fasteners and is listed by UL for use in dry locations.

Key Features

• Fits 1-1/4 in EMT conduit
• 1/4 in threaded hole for rod or fastener attachment
• Spring steel construction
• Snap-close / push-in installation
• Pre-galvanized (zinc) finish
• UL listed; listed for dry location use

What this clamp does

The Orbit F20M4I provides a snap-close method for securing 1-1/4 in EMT conduit to structural members or supports. The design allows the conduit to be pushed into the clip until it engages and holds the conduit in place.

• Accepts 1-1/4 in EMT conduit
• Push-in snap-close action for conduit retention
• Can be secured to structure using the provided 1/4 in threaded hole and appropriate hardware

Common applications

Typical uses include conduit support and routing in installations where a dry-location clamp is appropriate.

• Conduit support systems
• Beam or flange attachment when mounted with suitable fasteners
• Purlin or stud mounting when used with appropriate hardware
• Contractor stock and prefab electrical assemblies

Construction and finish

The clamp is made from spring steel. The finish is described as pre-galvanized (zinc).

• Material: spring steel
• Finish: pre-galvanized / zinc

Mounting, hole and rod compatibility

This model includes a 1/4 in threaded hole intended to accept 1/4 in rod or compatible threaded fasteners. Select mounting hardware separately to suit the mounting surface and load conditions.

• Hole size: 1/4 in threaded
• Compatible with 1/4 in rod or 1/4 in threaded fasteners (sold separately)

Certifications and location rating

The F20M4I is listed by UL and is specified for use in dry locations. Buyers should verify that UL listing and the dry-location rating meet project requirements.

• Certification: UL listed
• Location rating: Dry locations

Before You Order

Confirm the model number and quantity before ordering and verify that 1-1/4 in EMT is the correct trade size for your conduit runs.

• Confirm catalog number F20M4I and EMT trade size (1-1/4 in)
• Select appropriate 1/4 in rod or fasteners separately for mounting

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Orbit 1-1/4 in EMT Snap-Close Conduit Clamp F20M4I. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.