Orbit 1 in EMT Push-In Conduit Clamp F16P

Product Overview

The Orbit F16P is a push-in conduit clamp sized for 1 in EMT. It uses a push-in, snap-close style for conduit support in installations and prefabricated assemblies.

Constructed from spring steel with a pre-galvanized or zinc finish and a 9/32 in plain hole, F16P is intended for dry-location conduit attachment to beams, purlins, studs or support hardware and for contractor stock.

Key Features

• Sized for 1 in EMT conduit
• 9/32 in plain hole for fastening
• Spring steel construction
• Pre-galvanized / zinc finish
• Push-in / snap-close installation style

What this clamp does

The Orbit F16P secures 1 in EMT conduit using a push-in, snap-close action. It retains conduit to structural elements or to support hardware where a 9/32 in fastener hole is acceptable.

This clamp is intended for conduit support—confirm load and spacing requirements from applicable electrical code and project plans before relying on any single clamp for mechanical load-bearing.

• Secures 1 in EMT conduit
• Push-in installation for quick attachment
• Attaches conduit to beams, purlins, studs, rods or prefabricated assemblies

Typical applications

Common uses include conduit support in commercial ceiling work, stud wall support, beam or flange attachments, purlin mounts, and prefabricated electrical assemblies. Contractors may stock these clamps for field repairs and installations.

• Commercial ceiling conduit support
• Beam and flange attachments
• Purlin and stud attachments
• Contractor stock and prefab assemblies

Materials and finish

F16P is made from spring steel to provide resilient retention when pushed into place. The clamp is finished with a pre-galvanized or zinc coating for basic corrosion resistance appropriate for dry-location installations.

• Material: spring steel
• Finish: pre-galvanized or zinc

Installation and compatibility notes

Installations should be performed by qualified electrical personnel and verified against project drawings and local codes. Confirm the model number, trade size, mounting method and that a 9/32 in plain hole matches your chosen fastener before installing.

The product is described for dry-location use; verify compatibility with the specific box, conduit layout and required clearances on your project.

• Mounting style: push-in / snap-close clip
• Hole size (fastener): 9/32 in plain hole
• Location: described for dry locations

Before You Order

Confirm the model number, required quantity, and that 1 in EMT and a 9/32 in fastener hole match your project needs.

• Verify trade size: 1 in EMT
• Verify fastener hole size: 9/32 in plain hole
• Confirm dry-location suitability for your application

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Orbit 1 in EMT Push-In Conduit Clamp F16P. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.