Nora Lighting NUTP13-W9-12-930/HWSP Custom Cut 9-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord w/ Surge Protector

Product Overview

The Nora NUTP13-W9-12-930/HWSP is a 9-foot, 120 V continuous LED tape light that delivers 330 lumens at 3.6 watts per foot with a warm 3000 K color temperature.

This SKU ships with mounting clips and an 8-foot hardwired power cord that includes an integrated surge protector; it is intended for hardwired 120 V installations and custom cut runs.

Key Features

• 330 lumens total output; 3.6 W per foot on 120 V
• 3000 K color temperature (warm white)
• 9-foot continuous tape light, custom-cut capable
• Includes mounting clips and 8' hardwired power cord with surge protector
• Designed for 120 V feed (confirm driver voltage and wattage headroom for run length)

What this product does

The Nora NUTP13-W9-12-930/HWSP is a continuous LED tape light intended to provide linear ambient or accent illumination from a 120 V supply. It is supplied as a 9-foot length that can be custom cut for runs where continuous, low-profile linear light is required.

• Application examples: under-cabinet, toe-kick, display, or cove lighting where a 3000 K warm white is desired.
• Operates directly on 120 V — confirm system wiring for your installation.

Light output and color

This SKU delivers 330 lumens at a rate of 3.6 watts per foot with a color temperature of 3000 K (warm white). These values describe the product's electrical and photometric characteristics as supplied.

• Lumen output: 330 lm
• Wattage: 3.6 W (per foot basis provided in product data)
• Color temperature: 3000 K (warm white)

Installation and electrical requirements

The tape is designed for connection to a 120 V supply. Confirm driver voltage and wattage headroom for the total run length before installation. Follow local electrical codes and installer best practices for hardwired fixtures.

• Hardwired 8' power cord with integrated surge protector is included for connection to a 120 V circuit.
• Confirm driver/wattage headroom for the assembled run; verify connection method and overcurrent protection as required by code.

Included components and customization

This SKU ships as a 9-foot continuous tape light and includes mounting clips plus an 8-foot hardwired power cord with surge protection. The tape can be custom cut to length where marked; confirm cut points and termination requirements during installation.

• Includes: mounting clips; 8' hardwired power cord with surge protector.
• Custom cut capable — cut only at manufacturer-designated points (confirm before cutting).

Before You Order

Confirm the model number and quantity required before ordering. Verify driver voltage and wattage headroom for your planned run length and confirm that a 120 V hardwired connection meets your application and local code requirements.

• Confirm cut points and termination requirements before customizing length.
• If using multiple runs, calculate total wattage to ensure adequate headroom from the feed/driver.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W9-12-930/HWSP Custom Cut 9-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord w/ Surge Protector. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.