Nora Lighting NUTP13-W6-12-940/CP Custom Cut 6-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 4000K, w/ Mounting Clips and 8' Cord & Plug

Product Overview

The Nora Lighting NUTP13-W6-12-940/CP is a 6-foot continuous LED tape light engineered for 120 V operation. It produces 330 lumens while consuming 3.6 watts (per foot measurement basis as specified) and delivers a neutral 4000 K color temperature.

This SKU ships with mounting clips and an 8-foot cord with plug for straightforward connection to a 120 V outlet; it is offered as a custom-cut, continuous tape intended for professional lighting applications.

Key Features

• Output: 330 lumens at 3.6 W (product-rated output as supplied)
• Color temperature: 4000 K (neutral white)
• Designed for 120 V supply
• Includes mounting clips and an 8' cord with plug
• Custom-cut continuous tape, 6 ft length (model-specific)

What this tape light does

The NUTP13-W6-12-940/CP is a continuous LED tape designed to provide linear, neutral-white illumination for under-cabinet, cove, accent, and other architectural applications. Its 4000 K color temperature produces a neutral white appearance suitable for general task and accent lighting.

Output and power are provided as product-rated values: 330 lumens with a 3.6 W rating (per the product data). Use these values to compare delivered light level and energy use against your project requirements.

• Neutral 4000 K color temperature for balanced white light
• Rated output: 330 lm and 3.6 W as specified for the SKU

Electrical and power requirements

This SKU is specified for 120 V operation. Confirm the supply is 120 V and verify driver voltage and wattage headroom for the full run length before installation. Proper driver selection and total wattage planning are necessary when connecting multiple runs or custom lengths.

• Rated voltage: 120 V
• Confirm driver voltage and wattage headroom for run length

Mounting and included items

The product includes mounting clips and an 8-foot cord with plug to facilitate direct connection to a 120 V outlet. Mounting clips allow secure attachment to typical surfaces used in under-cabinet and accent lighting installations.

Because this is a custom-cut continuous tape, plan cuts and connections according to the project layout and confirm compatibility with any additional accessories or controllers prior to ordering.

• Includes mounting clips
• Includes 8' cord and plug for 120 V connection
• Custom-cut continuous tape — plan connections and run lengths accordingly

Key specifications

Use the following SKU-specific specifications for selection and comparison.

• Brand: Nora Lighting
• Model / SKU: NUTP13-W6-12-940/CP
• Product type: LED Tape Light (continuous)
• Series: NUTP13-W6
• Length: 6 ft (custom cut continuous tape)
• Lumens: 330 lm
• Wattage: 3.6 W
• Voltage: 120 V
• Color temperature: 4000 K
• Includes: mounting clips and 8' cord & plug

Before You Order

Confirm the model number and quantity required for your project. Verify that your site has a 120 V supply suitable for this tape and plan for driver/wattage headroom if you intend to combine runs or make custom-length assemblies.

• Confirm model: NUTP13-W6-12-940/CP
• Verify 120 V supply and appropriate driver/wattage headroom for total run length
• Plan mounting and cut points for continuous tape prior to installation

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W6-12-940/CP Custom Cut 6-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 4000K, w/ Mounting Clips and 8' Cord & Plug. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.