Nora Lighting NUTP13-W5-8-12-930/HW Custom Cut 5-ft, 8-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

The Nora NUTP13-W5-8-12-930/HW is a factory-length LED tape light built for direct 120 V connection. It delivers 330 lumens while consuming 3.6 watts per foot and produces a warm 3000 K white.

This SKU ships with mounting clips and an 8-foot hardwired power cord for installation where a continuous, custom-cut LED tape run is required.

Key Features

• Rated for 120 V direct connection — no external low-voltage driver required for this SKU
• Output: 330 lumens total at 3.6 W (reported per foot basis: 3.6 W/ft)
• Color temperature: 3000 K (warm white)
• Includes mounting clips and an 8' hardwired power cord
• Factory-cut length: 5 ft 8 in (custom cut designation in model name)

What this product is for

The Nora NUTP13-W5-8-12-930/HW is an LED tape light intended for continuous accent, undercabinet, cove, or linear wash lighting where a factory-length, hardwired 120 V solution is preferred. It provides consistent warm-white illumination along the 5 ft 8 in run.

• Suitable for interior accent and task lighting runs requiring a continuous, hardwired strip
• Configured for use on a 120 V branch circuit

Electrical and power details

This SKU is specified for 120 V supply and reports an output of 330 lumens at a consumption rate of 3.6 W (expressed per foot in the model description). Confirm supply wiring and capacity before installation.

• Voltage: 120 V
• Reported wattage: 3.6 W (per foot basis documented)
• Reported lumen output: 330 lm

Installation and mounting

The product ships with mounting clips and an 8-foot hardwired power cord to simplify attachment and connection to a 120 V supply. Follow local electrical codes for hardwired connections and provide appropriate junction box or termination as required by the installation.

• Includes mounting clips for mechanical attachment
• Includes an 8' hardwired power cord for direct connection to 120 V
• Confirm need for junction box, conduit, or termination details per project and local code

Length, light output and color

This specific SKU is denoted as a 5 ft 8 in length and produces warm-white light at 3000 K. Use the lumen and wattage values to plan spacing and expected illumination for the intended application.

• Length: 5 ft, 8 in (as indicated by model designation)
• Color temperature: 3000 K (warm white)
• Lumen output: 330 lm (total reported)

Before you order

Confirm that this exact model, electrical characteristics and length meet your project requirements. Verify on-site wiring and any control or dimming needs prior to purchase.

• Confirm the model number and quantity required before ordering
• Verify a 120 V supply and sufficient circuit capacity for the planned run
• If dimming or driver-based control is required, confirm compatibility with this 120 V hardwired tape configuration

Before You Order

Confirm the model number, quantity and installation requirements before ordering. This SKU is a hardwired 120 V tape light—ensure the run length, supply circuit and any control or dimming approach are compatible with a 120 V continuous tape solution.

• Confirm model: NUTP13-W5-8-12-930/HW
• Verify you have a 120 V source and adequate circuit capacity
• If dimming or integration with a lighting control system is required, confirm compatibility with this hardwired configuration

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W5-8-12-930/HW Custom Cut 5-ft, 8-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.