Nora Lighting NUTP13-W5-12-927/HW Custom Cut 5-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

The Nora Lighting NUTP13-W5-12-927/HW is a 5-foot, 120 V continuous LED tape light that produces 330 lumens at 3.6 watts per foot with a 2700K color temperature.

This SKU ships with mounting clips and an 8-foot hardwired power cord for direct connection to a 120 V supply. It is offered as a custom-cut continuous tape light for installation runs.

Key Features

• Output: 330 lumens at 3.6 W per foot
• Color temperature: 2700K (warm white)
• 120 V hardwired design with included 8' power cord
• Supplied with mounting clips for surface attachment
• Custom-cut 5-foot continuous LED tape length (model NUTP13-W5-12-927/HW)

What this tape light does

The NUTP13-W5-12-927/HW is a continuous 5-foot LED tape designed for linear accent and task lighting where a warm 2700K light is desired. It delivers 330 lumens per foot while consuming 3.6 watts per foot, providing a consistent warm-white output along the full run length.

• Suitable for under-cabinet, cove, display, and interior accent applications that accept hardwired 120 V tape solutions.
• Custom-cut continuous construction enables long runs without visible breaks when installed per project requirements.

Electrical and power requirements

This SKU is designed for direct connection to a 120 V supply and includes an 8-foot hardwired power cord for that purpose. Confirm driver voltage and available wattage headroom for the total run length before installation.

• Nominal input voltage: 120 V (hardwired)
• Power consumption: 3.6 W per foot (refer to run totals when calculating circuit load)

Mounting and installation notes

The product is supplied with mounting clips for surface attachment. Follow standard installation practice for hardwired tape lights and verify compatibility with mounting surfaces and local electrical codes.

• Includes mounting clips and an 8' hardwired power cord.
• Confirm model number and required quantity for project bids and ordering.

Key specifications

Use the following specifications as a concise technical reference for planning and specification.

• Model: NUTP13-W5-12-927/HW
• Length: 5 feet (custom cut continuous tape)
• Delivered Light: 330 lm (per foot basis listed)
• Power: 3.6 W (per foot)
• Voltage: 120 V (hardwired)
• Color Temperature: 2700K
• Includes: mounting clips, 8' hardwired power cord

Before You Order

Confirm the model number and quantity required before ordering. Verify that your installation can provide a 120 V supply and that driver voltage and wattage headroom are adequate for the planned run length.

• Confirm 120 V supply and hardwired connection requirements.
• Calculate total wattage for your run length to ensure circuit and driver capacity.
• Check mounting surface suitability for supplied mounting clips and the continuous tape format.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W5-12-927/HW Custom Cut 5-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.