Nora Lighting NUTP13-W30-12-927/HW Custom Cut 30-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

Nora Lighting NUTP13-W30-12-927/HW is a 30-foot continuous LED tape light configured for 120 V hardwired operation. It is specified at 330 lumens and 3.6 watts per foot with a 2700K color temperature.

The unit ships with mounting clips and an 8-foot hardwired power cord and is supplied as a continuous length that may be custom cut following the product’s cut points.

Key Features

• 330 lumens at 3.6 W per foot
• Warm white 2700K color temperature
• Configured for 120 V hardwired connection
• Includes mounting clips and an 8' hardwired power cord
• Supplied as a 30-foot continuous length that can be cut to length

Function and intended use

This SKU is a continuous LED tape light supplied as a 30-foot length intended for linear illumination applications where a warm white (2700K) appearance is desired. The length is custom-cuttable at manufacturer-specified cut points.

• Linear, continuous-format tape light for accent, under-cabinet, cove, or similar applications.
• Supplied as a 30-foot continuous run that can be cut to length per the product's cut points.

Electrical and power requirements

The product is configured for 120 V hardwired operation. Use the provided wattage value to calculate total run load for circuit planning.

• Rated voltage: 120 V (hardwired configuration)
• Power consumption: 3.6 W per foot — use this value to calculate total wattage for your planned run

Mounting and installation details

The unit includes mounting clips and an 8-foot hardwired power cord. Follow the manufacturer's cut-point guidance when trimming the run and comply with local electrical codes for hardwiring.

• Includes mounting clips for attachment to mounting surfaces
• Includes an 8' hardwired power cord for connection to line voltage
• Custom cutting is supported — verify cut points and wiring continuity during installation

Performance and light output

Light output and color characteristics are provided to help plan spacing and total output. Use the lumen and wattage figures to determine suitability for your application.

• Color temperature: 2700 K (warm white)
• Lumen value listed: 330 lm (as specified for the product)
• Wattage: 3.6 W per foot

Before you order

Verify that the hardwired 120 V configuration and the SKU match your project requirements before ordering.

• Confirm the SKU NUTP13-W30-12-927/HW and required quantity.
• Calculate total wattage using 3.6 W per foot to ensure circuit capacity.
• Confirm intended cut points and wiring plan if customizing the 30-foot length.
• Arrange installation by a qualified electrician as required by local codes.

Before You Order

Confirm the SKU, required quantity, and that a hardwired 120 V connection and the indicated wattage are appropriate for your installation.

• Confirm NUTP13-W30-12-927/HW is the intended model.
• Calculate total wattage for your planned run using 3.6 W per foot.
• Confirm cut points and wiring plan if customizing the 30-foot length.
• Consult a qualified electrician for hardwired connections and compliance with local electrical codes.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W30-12-927/HW Custom Cut 30-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.