Nora Lighting NUTP13-W29-8-12-940/HW Custom Cut 29-ft, 8-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 4000K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

The Nora Lighting NUTP13-W29-8-12-940/HW is a continuous LED tape light cut to 29 ft, 8 in and configured for direct 120 V connection. It delivers 330 lumens at 3.6 watts per foot with a 4000 K color temperature.

This SKU ships with mounting clips and an 8-foot hardwired power cord for direct connection to a 120 V supply. Designed for runs where a factory-configured continuous tape and hardwired feed are required.

Key Features

• Continuous LED tape light — 29 ft, 8 in length (custom cut SKU)
• Performance: 330 lumens at 3.6 W per foot
• Color temperature: 4000 K (neutral white)
• 120 V input with 8' hardwired power cord (HW)
• Includes mounting clips for surface installation

What this tape light delivers

Answer: continuous linear illumination for architectural and accent applications, specified for a long run with factory length and hardwired feed.

• Luminous output: 330 lumens (total listed for the SKU) at 3.6 W per foot.
• Color: 4000 K neutral white suitable for general-purpose lighting and task-adjacent accents.
• Length: 29 ft, 8 in continuous run—configured as a single continuous tape.

Electrical and power considerations

Answer: this SKU is configured for direct connection to a 120 V supply; confirm supply and driver headroom before installation.

• Input voltage: 120 V.
• Power density: 3.6 W per foot — use this value to calculate total wattage for run and to confirm circuit capacity.
• Manufacturer note (product data): confirm driver voltage and wattage headroom for the run length prior to installation.

Mounting and connection

Answer: the SKU includes basic mounting hardware and an attached hardwired power cord for a direct 120 V connection.

• Includes mounting clips for surface mounting the tape light.
• Includes an 8-foot hardwired (HW) power cord for direct connection to the building 120 V supply.
• Confirm local electrical code and use a qualified electrician for hardwired connections.

Who should specify this SKU

Answer: specifying contractors and lighting professionals needing a factory-configured continuous 29 ft, 8 in 120 V tape light in 4000 K with mounting clips and hardwired feed.

• Appropriate for architectural accent runs, under-cabinet or continuous cove lighting where a long continuous length and neutral white are required.
• Confirm project requirements (length, lumen output, and supply) before selecting this SKU.

Before You Order

Confirm the model number and quantity required before ordering. Verify the project’s 120 V supply, total wattage and driver/headroom requirements for the run length, and that a hardwired 8' cord is suitable for your installation and local code.

• Confirm the SKU: NUTP13-W29-8-12-940/HW.
• Verify total circuit load using 3.6 W per foot for run calculations.
• Plan for hardwired connection: consult a qualified electrician to meet local electrical code.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W29-8-12-940/HW Custom Cut 29-ft, 8-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 4000K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.