Nora Lighting NUTP13-W26-4-12-927/HW Custom Cut 26-ft, 4-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

The Nora Lighting NUTP13-W26-4-12-927/HW is a 26-foot continuous LED tape light designed for 120 V supply, delivering 330 lumens at 3.6 watts per foot in a 2700 K color temperature.

This SKU ships with mounting clips and an 8-foot hardwired power cord and is intended for custom cut installations where a continuous, hardwired 120 V tape solution is required.

Key Features

• 26-ft continuous LED tape light (custom cut capable)
• 330 lumens at 3.6 W per foot
• Warm white 2700 K color temperature
• Operates on 120 V with 8' hardwired power cord
• Includes mounting clips for surface installation

What this product is

The Nora NUTP13-W26-4-12-927/HW is a continuous LED tape light supplied as a 26-foot run intended for hardwired 120 V installations. It is designed for custom cutting on approved cut points to fit linear lighting runs where a continuous LED source is required.

• Product type: LED tape light (continuous run)
• Includes mounting clips and an 8' hardwired power cord

Light output and color

This SKU delivers 330 lumens at 3.6 watts per foot and produces a warm white 2700 K color temperature suitable for residential and hospitality settings where a warm, inviting light is desired.

• Lumen output: 330 lm (per the 26-ft run specification)
• Power consumption: 3.6 W per foot
• Color temperature: 2700 K (warm white)

Electrical and supply requirements

The NUTP13-W26-4-12-927/HW is designed to operate from a 120 V supply and ships with an 8-foot hardwired power cord. Confirm the available supply voltage and overall wattage headroom for the planned run length before installation.

• Operating voltage: 120 V
• Verify driver voltage and wattage headroom for your specific run and any connected loads

Mounting and installation notes

The product includes mounting clips for surface installation. It is intended for projects where the installer will hardwire the LED tape to a 120 V circuit. Ensure installation follows local electrical codes and that any cutting is performed only at manufacturer-designated cut points.

• Includes mounting clips for mechanical attachment
• 8' hardwired power cord provided for connection to a 120 V circuit
• Confirm cut points and wiring practices per project requirements

Technical specifications

Use the specifications below to confirm compatibility with your application and to reference the exact SKU when ordering or specifying.

• SKU: NUTP13-W26-4-12-927/HW
• Series: NUTP13-W26
• Run length: 26 ft (custom cut capable)
• Included accessories: mounting clips, 8' hardwired power cord

Before You Order

Confirm the model number and quantity required for your project. Verify that a 120 V supply and sufficient wattage headroom are available for the intended run length and any additional loads.

• Confirm SKU: NUTP13-W26-4-12-927/HW
• Verify supply voltage is 120 V and confirm wattage headroom
• Ensure installers observe manufacturer cut points and local electrical codes

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W26-4-12-927/HW Custom Cut 26-ft, 4-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.