Nora Lighting NUTP13-W26-12-940/HW Custom Cut 26-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 4000K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

Continuous 26-foot LED tape light by Nora Lighting, model NUTP13-W26-12-940/HW, designed for 120 V supply and custom cutting to length.

Output rated at 330 lumens and 3.6 watts per foot with a neutral white 4000 K color temperature; includes mounting clips and an 8-foot hardwired power cord.

Key Features

• 26-foot continuous LED tape light configured for 120 V operation
• Photometric output: 330 lm per foot at 3.6 W per foot
• Color temperature: 4000 K (neutral white)
• Includes mounting clips and an 8' hardwired power cord (HW)
• Custom-cuttable run for on-site length adjustments

What this tape light does

The Nora NUTP13-W26-12-940/HW is a continuous 26-foot LED tape light intended for linear accent, under-cabinet, or cove lighting where a 120 V connection is available. It produces 330 lumens per foot while consuming 3.6 watts per foot, delivering neutral white 4000 K illumination along the run.

• Designed for continuous runs and custom cutting per the series' cut points
• Neutral white 4000 K for balanced, color-stable illumination

Electrical and power requirements

This SKU is configured for direct connection to a 120 V supply. Confirm driver voltage and available wattage headroom for the total run length before installation.

• Nominal supply: 120 V
• Per-foot power: 3.6 W — use this to calculate total wattage for the installed length
• Confirm driver compatibility and headroom for any continuous or segmented runs

Mounting and installation notes

The product ships with mounting clips and an 8-foot hardwired power cord (HW) to simplify attachment and connection to the supply. The tape is intended to be cut at specified cut points to fit the installation.

• Includes mounting clips for secure attachment to typical mounting surfaces
• Includes an 8' hardwired power cord for connection to 120 V circuits
• Confirm cut points and installation method to maintain electrical integrity

Key specifications

Use the following verified specifications when comparing or specifying this SKU.

• Model / SKU: NUTP13-W26-12-940/HW
• Length: 26 ft (continuous)
• Lumens: 330 lm (per foot)
• Wattage: 3.6 W (per foot)
• Voltage: 120 V
• Color Temperature: 4000 K
• Included: mounting clips, 8' hardwired power cord

Before You Order

Confirm the model number and the total quantity and run length required for your project. Verify that your installation can provide a 120 V supply and that any driver or power supply used has sufficient voltage and wattage headroom for the intended run.

• Confirm NUTP13-W26-12-940/HW matches the specified color temperature and per-foot output.
• Calculate total wattage by multiplying 3.6 W per foot by the installed length to size drivers or circuit capacity.
• Confirm cut points and installation details before cutting the tape.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W26-12-940/HW Custom Cut 26-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 4000K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.