Nora Lighting NUTP13-W24-8-12-930/HWSP Custom Cut 24-ft, 8-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord w/ Surge Protector

Product Overview

Continuous 24 ft, 8 in (custom-cut) 120 V LED tape light from Nora Lighting, model NUTP13-W24-8-12-930/HWSP.

Rated for 330 lumens at 3.6 watts per foot with 3000K color temperature; supplied with mounting clips and an 8' hardwired power cord that includes a surge protector.

Key Features

• Continuous 24 ft, 8 in run length (custom cut)
• 330 lumens at 3.6 W per foot on 120 V
• Warm white 3000K color temperature
• Includes mounting clips and an 8' hardwired power cord with surge protection
• Single-SKU product: NUTP13-W24-8-12-930/HWSP

Function and light output

This SKU is a continuous LED tape light engineered to deliver 330 lumens at 3.6 watts per foot when operated on a 120 V supply. The color temperature is 3000K (warm white), suitable for general accent, under-cabinet, cove, or task lighting where a continuous linear source is desired.

• Light output: 330 lm (per linear foot specification as provided)
• Power: 3.6 W per foot on 120 V
• Color temperature: 3000K (warm white)

Electrical and power requirements

This tape light is specified for operation on a 120 V supply. Confirm driver voltage and wattage headroom for the full run when planning a system; this SKU includes a hardwired power cord with an integrated surge protector for line connection.

• Rated voltage: 120 V
• Confirm driver/wattage headroom for the total run length before installation

Included components and installation notes

The product ships with mounting clips and an 8-foot hardwired power cord that includes a surge protector. Use the supplied mounting clips to secure the tape to appropriate surfaces. Contractors and installers should verify supply voltage and plan for appropriate cut points and terminations per project requirements.

• Includes: mounting clips; 8' hardwired power cord with surge protector
• Mounting: secure with supplied clips to suitable substrates
• Installation planning: confirm cut points, terminations, and power feed locations

Run length and configuration

The model designation indicates a continuous 24 ft, 8 in run length for this SKU. The product is intended for custom-cut installations; confirm the required overall length and model number before ordering.

• Nominal run: 24 ft, 8 in (custom cut / continuous run)
• Confirm model number and required quantity/length when specifying or ordering

Before You Order

Confirm the full model number (NUTP13-W24-8-12-930/HWSP) and the total length or quantity required before ordering. Verify that a 120 V supply and any necessary driver/wattage headroom are available for your planned run length.

• Verify the required run length and cut points for your installation.
• Confirm 120 V supply and that wattage headroom is adequate for the run.
• Ensure the included hardwired power cord configuration and surge protector meet site requirements.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W24-8-12-930/HWSP Custom Cut 24-ft, 8-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord w/ Surge Protector. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.