Nora Lighting NUTP13-W22-4-12-940/HW Custom Cut 22-ft, 4-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 4000K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

Continuous 22 ft 4 in LED tape light from Nora Lighting (model NUTP13-W22-4-12-940/HW) designed for 120 V hardwired installations.

Delivers 330 lumens at 3.6 watts per foot with a 4000 K neutral white color temperature. Includes mounting clips and an 8-foot hardwired power cord.

Key Features

• Full-length continuous 22 ft 4 in LED tape light (custom cut capable—confirm required cut lengths before ordering).
• Output: 330 lm total, 3.6 W per foot on 120 V supply.
• Color temperature: 4000 K (neutral white).
• Supplied with mounting clips and an 8' hardwired power cord for permanent installation.
• Designed for line-voltage (120 V) operation — no external low-voltage driver required.

What this tape light does

The Nora NUTP13-W22-4-12-940/HW is a continuous LED tape light intended to provide neutral-white ambient or task illumination in a hardwired, 120 V installation. It produces a total of 330 lumens at an energy rate of 3.6 watts per foot, delivering consistent 4000 K color temperature along the run.

• Light output: 330 lm (aggregate) with 3.6 W per foot
• Color temperature: 4000 K (neutral white)

Electrical and power requirements

This SKU is designed for direct connection to a 120 V supply. It operates on line voltage and includes an 8-foot hardwired power cord for permanent connection.

• Voltage: 120 V
• Power: 3.6 W per foot — confirm driver voltage and wattage headroom for run length

Mounting and installation details

The product ships with mounting clips to secure the tape light along its length. Because it is a hardwired line-voltage product, installation should follow local electrical codes and be performed by a qualified electrician when required.

• Includes mounting clips and 8' hardwired power cord
• Confirm wiring methods and compliance with local electrical code prior to installation

Length, cutting and configuration

The NUTP13-W22-4-12-940/HW is supplied as a 22 ft, 4 in continuous run. If a different length or multiple runs are required, confirm model numbers, cut points and electrical planning before ordering.

• Nominal length: 22 ft 4 in (continuous)
• Confirm the model number and required quantity and cut lengths before ordering

Before You Order

Confirm the model number, required run length and quantity before ordering. Verify that your project provides a 120 V supply and that installed circuits and wiring meet the wattage and voltage needs for the total run.

• Confirm driver voltage and wattage headroom for the run length.
• Ensure installation method and hardwiring comply with local electrical codes.
• If different lengths or multiple runs are needed, verify cut points and electrical planning prior to purchase.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W22-4-12-940/HW Custom Cut 22-ft, 4-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 4000K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.