Nora Lighting NUTP13-W22-12-930/HW Custom Cut 22-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

The Nora Lighting NUTP13-W22-12-930/HW is a 22-foot continuous 120V LED tape light delivering 330 lumens at 3.6 watts per foot with a 3000K color temperature.

This SKU ships with mounting clips and an 8-foot hardwired power cord for direct connection to a 120V supply; it's intended for custom-cut continuous runs—confirm driver voltage and wattage headroom for your installation.

Key Features

• 22 ft continuous LED tape light (custom cut)
• 330 lumens total at 3.6 W per foot
• 3000K color temperature (warm white)
• 120V input with 8' hardwired power cord
• Includes mounting clips for secure installation

Function and output

The NUTP13-W22-12-930/HW provides continuous linear illumination across a 22-foot run. It delivers 330 lumens at a rate of 3.6 watts per foot with a color temperature of 3000K (warm white), suitable for accent, under-cabinet, or cove lighting where a warm, consistent wash of light is desired.

• Total lumen output: 330 lm (3.6 W per foot)
• Color temperature: 3000K (warm white)
• Continuous 22-ft run designed for custom cutting to length

Electrical and power requirements

This tape light is specified for 120V operation and includes an 8-foot hardwired power cord for direct connection to a 120V supply. Confirm available supply voltage and wattage headroom for the length of the run before installation.

• Input voltage: 120 V
• Hardwired 8' power cord provided (direct connection to 120V)
• Confirm driver voltage and wattage headroom for your run length

Mounting and installation notes

The product ships with mounting clips to secure the tape light in place. It is intended to be custom cut for continuous runs; follow applicable electrical codes and safe wiring practices when hardwiring to a 120V supply.

• Includes mounting clips
• 8' hardwired power cord included
• Custom-cut capable—cut only at permitted locations along the tape

Configuration and ordering

This page describes the single SKU NUTP13-W22-12-930/HW from the NUTP13-W22 series. Confirm the model number and required quantity when specifying for a project or ordering to ensure the correct length, color temperature, and hardwired configuration.

• Model / SKU: NUTP13-W22-12-930/HW
• Series: NUTP13-W22
• Confirm model number and quantity before ordering

Before You Order

Confirm the exact model number (NUTP13-W22-12-930/HW), run length requirements, and the number of pieces needed for your project. Verify that you have appropriate 120V supply access and sufficient wattage headroom for the planned configuration.

• Confirm model number and quantity before ordering
• Verify 120 V supply and driver/wattage headroom for your run length
• Follow local electrical code and safe wiring practices for hardwired installations

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W22-12-930/HW Custom Cut 22-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.