Nora Lighting NUTP13-W20-12-927/HW Custom Cut 20-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

The Nora Lighting NUTP13-W20-12-927/HW is a 20-foot continuous LED tape light designed for 120 V wiring. It delivers 330 lumens for the nominal run at 3.6 watts per foot with a warm 2700 K color temperature.

This SKU ships with mounting clips and an 8-foot hardwired power cord and is offered for custom cutting to fit installations that require continuous low-profile linear lighting.

Key Features

• Continuous 20-foot LED tape light built for 120 V supply
• Light output: 330 lumens for the specified run; 3.6 W per foot
• Warm white 2700 K color temperature
• Includes mounting clips and an 8' hardwired power cord
• Custom-cut capable for field trimming and installation

What this tape light does

The NUTP13-W20-12-927/HW provides a continuous, low-profile source of warm white illumination intended for linear accent and task lighting applications where a 120 V supply is available. It is supplied as a 20-foot run that can be custom cut to fit the installation.

Light output and color

This SKU is specified at 330 lumens for the described run and consumes 3.6 watts per foot. The LED output is warm white at 2700 K, suitable for residential and hospitality lighting where a warm, low-color-temperature appearance is desired.

• Lumen rating: 330 lm (for the product as specified)
• Power draw: 3.6 W per foot
• Color temperature: 2700 K

Electrical and compatibility notes

The tape light is designed for connection to a 120 V supply. Confirm driver voltage and wattage headroom for the total run length and ensure the supply wiring and branch circuit meet local electrical code and load requirements.

• Rated voltage: 120 V
• Confirm driver and wattage headroom for the run length before installation

Mounting and installation

The NUTP13-W20-12-927/HW ships with mounting clips and an 8-foot hardwired power cord to simplify installation. It is intended for custom cutting in the field to match layout requirements—follow manufacturer instructions for cut points and splice methods.

• Includes mounting clips
• Includes 8' hardwired power cord
• Custom-cut capable—follow cut-point guidance from the manufacturer

Product specifications

Key specification values for planning and specification are listed below.

Before You Order

Confirm the exact model number and quantity required for your project. Verify available supply voltage, driver compatibility, and total wattage headroom for the run length before placing an order.

• Confirm model: NUTP13-W20-12-927/HW
• Verify 120 V supply and driver wattage headroom for the total run
• Confirm cutting and splice requirements for your installation

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W20-12-927/HW Custom Cut 20-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.