Nora Lighting NUTP13-W2-12-930/HWSP Custom Cut 2-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord w/ Surge Protector

Product Overview

The Nora NUTP13-W2-12-930/HWSP is a custom-cut 2-foot continuous LED tape light designed for 120 V installations. It produces 330 lumens while consuming 3.6 watts per foot and emits a warm white 3000 K light.

This SKU ships with mounting clips and an 8-foot hardwired power cord that includes a surge protector for direct connection to a 120 V supply.

Key Features

• Output: 330 lumens (total) at 3.6 W per foot
• Voltage: 120 V hardwired
• Color temperature: 3000 K (warm white)
• Includes mounting clips and an 8' hardwired power cord with surge protector
• Custom-cut 2-foot continuous tape light — model NUTP13-W2-12-930/HWSP

Function and light output

The NUTP13-W2-12-930/HWSP is specified to deliver 330 lumens while operating at 3.6 watts per foot. The LED tape emits a 3000 K warm white color temperature suitable for general accent and task lighting where warm white output is desired.

• Lumen output: 330 lm (total for the 2‑ft unit as specified)
• Power draw: 3.6 W per foot
• Color temperature: 3000 K (warm white)

Electrical and wiring considerations

This tape light is configured for direct connection to a 120 V supply and includes an 8-foot hardwired power cord with an integrated surge protector. Confirm driver voltage and wattage headroom for the total run length of tape you plan to install.

• Rated voltage: 120 V
• Includes hardwired power cord (8') with surge protection
• Confirm driver/wattage headroom and total run power when ganging multiple units or extending runs

Mounting and included accessories

The product ships with mounting clips for secure installation of the continuous tape. Use the provided clips to fasten the tape to appropriate clean surfaces or into channels as required by the installation.

• Includes mounting clips
• Designed for continuous tape installations; mount per project requirements

Configuration and model identification

This listing is for the single SKU NUTP13-W2-12-930/HWSP, a custom-cut 2-foot length from the NUTP13-W2 series. Confirm the model number and quantity required when specifying or ordering for a project.

• Model / SKU: NUTP13-W2-12-930/HWSP
• Series: NUTP13-W2
• Length: 2 feet (custom cut configuration)

Before You Order

Confirm the model number and quantity required before ordering. Verify the required run length, driver voltage and wattage headroom, and that a 120 V supply is available at the installation location.

• Confirm NUTP13-W2-12-930/HWSP is the correct SKU for your run and length needs
• Verify total wattage and driver requirements if connecting multiple units or extending runs
• Ensure an appropriate 120 V connection point for the hardwired cord

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W2-12-930/HWSP Custom Cut 2-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord w/ Surge Protector. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.