Nora Lighting NUTP13-W17-12-930/HW Custom Cut 17-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

The Nora NUTP13-W17-12-930/HW is a 17-foot continuous LED tape light designed for 120 V supply. It delivers 330 lumens at 3.6 watts per foot with a 3000 K color temperature.

This SKU ships with mounting clips and an 8-foot hardwired power cord for direct connection to a 120 V circuit; the run is intended for custom cutting to length.

Key Features

• 17-foot continuous LED tape light for 120 V applications
• 330 lumens total output at 3.6 W per foot
• Warm white 3000 K color temperature
• Includes mounting clips and an 8' hardwired power cord
• Custom-cuttable run length for field sizing

What this tape light does

The Nora NUTP13-W17-12-930/HW is a continuous LED tape light engineered for linear accent and task lighting on a 120 V circuit. It produces 330 lumens at an electrical consumption rate of 3.6 watts per foot with a 3000 K warm white output suitable for under-cabinet, shelving, cove, and display lighting.

• Light output: 330 lm (aggregate spec provided by manufacturer data)
• Power: 3.6 W per foot on a 120 V supply
• Color temperature: 3000 K (warm white)

Electrical requirements and driver notes

This SKU is designed for direct connection to a 120 V supply via the included hardwired power cord. Confirm that the supply is 120 V and that any driver or power distribution approach used for multiple runs accommodates the electrical load.

• Designed for 120 V operation
• Verify driver voltage and wattage headroom for the intended run length before installation

Mounting and hardwired connection

The product includes mounting clips for securing the tape to a substrate and an 8-foot hardwired power cord for permanent connection. Use appropriate wiring practices and local electrical code when making the hardwired connection.

• Includes mounting clips
• Includes 8' hardwired power cord for direct connection to 120 V

Length, cutability and on-site sizing

The NUTP13-W17-12-930/HW is supplied as a 17-foot continuous run that can be custom cut in the field to meet installation requirements. Confirm the required number of runs and cumulative wattage when planning a project.

• Factory length: 17 ft continuous
• Field cuttable to required lengths (confirm cut points and practices during installation)

Before You Order

Confirm the model number and quantity required before ordering. Verify that the project supply is 120 V and check total wattage and driver headroom for the number of runs you plan to install. Ensure field cutting practices and cut points suit your layout.

• Confirm NUTP13-W17-12-930/HW is the correct SKU for your application
• Verify 120 V supply and total wattage for all runs
• Plan mounting locations and where the 8' hardwired cord will connect to power

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W17-12-930/HW Custom Cut 17-ft 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.