Nora Lighting NUTP13-W16-8-12-927/HW Custom Cut 16-ft, 8-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

Nora Lighting NUTP13-W16-8-12-927/HW is a continuous LED tape light cut to 16 ft 8 in, designed for 120 V line-voltage installations. It produces 330 lumens at 3.6 watts per foot and delivers warm 2700 K color.

This SKU ships with mounting clips and an 8-foot hardwired power cord for direct connection to a 120 V supply; verify driver voltage and wattage headroom for the total run before installation.

Key Features

• Output: 330 lumens at 3.6 W per foot
• Color temperature: 2700 K (warm white)
• Voltage: 120 V line-voltage tape light
• Length: custom cut 16 ft, 8 in
• Includes mounting clips and an 8' hardwired power cord

Function and intended use

The NUTP13-W16-8-12-927/HW is a continuous LED tape light intended for linear accent and task lighting in applications that accept a hardwired, line-voltage LED tape. Its continuous form factor suits under-cabinet lighting, toe-kick illumination, coves, and other architectural accent uses where a warm 2700 K appearance is desired.

Light output and color

This SKU delivers 330 lumens while consuming 3.6 watts per foot. The specified color temperature is 2700 K, which produces a warm white light suitable for residential and hospitality environments that favor warmer tones.

• Lumens: 330 lm
• Wattage: 3.6 W per foot
• Color temperature: 2700 K (warm white)

Electrical and installation notes

The product is designed for connection to a 120 V supply. Confirm the available supply voltage and the driver voltage/wattage headroom required for the full run length before installation. Adhere to local electrical codes and use qualified personnel for hardwired connections.

• Nominal voltage: 120 V
• Confirm driver voltage and wattage headroom for the run length
• Hardwired connection requires appropriate electrical termination and compliance with local codes

Mounting, connections, and what’s included

This SKU includes mounting clips and an 8-foot hardwired power cord for direct connection to the building electrical supply. Mounting clips secure the tape to mounting surfaces; follow manufacturer recommendations for spacing and surface preparation.

• Includes mounting clips
• Includes 8' hardwired power cord
• Custom cut length: 16 ft, 8 in

Before you order

Confirm the model number and required quantity before ordering. Verify that a 120 V hardwired tape light is appropriate for the intended installation and that the driver/transformer (if used) provides sufficient wattage headroom for the total run.

• Confirm model: NUTP13-W16-8-12-927/HW
• Confirm required quantity and run length
• Ensure driver/installation plan supports 120 V line-voltage tape light

Before You Order

Confirm the model number and quantity required before ordering. Verify that the installation provides a 120 V supply and that any driver or power provisioning has sufficient wattage headroom for the length of the run. For hardwired connections, plan for proper electrical termination and compliance with local codes.

• Confirm: NUTP13-W16-8-12-927/HW
• Verify 120 V supply and driver wattage headroom for total run
• Have a qualified electrician perform hardwired connections

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W16-8-12-927/HW Custom Cut 16-ft, 8-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.