Nora Lighting NUTP13-W10-8-12-930/HW Custom Cut 10-ft, 8-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

The Nora Lighting NUTP13-W10-8-12-930/HW is a continuous 120 V LED tape light delivering 330 lumens at 3.6 watts per foot with a 3000 K (warm white) color temperature.

This SKU ships as a custom-cut 10 ft, 8 in run and includes mounting clips plus an 8-foot hardwired power cord for direct connection to a 120 V supply.

Key Features

• Output: 330 lumens at 3.6 W per foot
• Color temperature: 3000 K (warm white)
• Voltage: 120 V hardwired
• Length: 10 ft, 8 in continuous run (custom cut)
• Includes mounting clips and 8' hardwired power cord

What this tape light does

This fixed-length LED tape provides continuous linear illumination suitable for under-cabinet, cove, toe-kick, or accent applications that accept a hardwired 120 V solution. The unit is specified as delivering 330 lumens at 3.6 watts per foot with a 3000 K color temperature, producing warm white light output across the run.

• Continuous, non-segmented 10 ft, 8 in run (custom cut length)
• Designed to be powered from a 120 V supply via the included hardwired cord

Electrical and power requirements

The NUTP13-W10-8-12-930/HW is a 120 V tape light. Confirm supply voltage and driver headroom for your installation before ordering.

• Rated for 120 V connection (hardwired with included 8' power cord)
• Specification lists 3.6 W per foot and 330 lumens per foot — verify total wattage for the full run when planning circuits

Mounting and installation notes

The product ships with mounting clips for mechanical attachment. The unit is provided as a continuous run and is intended to be hardwired into a 120 V circuit using the supplied 8' power cord.

• Mounting clips included for secure installation
• Hardwired power cord requires connection to a 120 V supply by a qualified electrician

Ordering and use considerations

Confirm the model number and required quantity before placing an order. Because this SKU is a continuous custom-cut run with a hardwired cord, verify the measured length and electrical access at the installation location.

• Intended for projects specifying 120 V LED tape light
• Confirm total circuit load when combining multiple runs or other fixtures

Before You Order

Confirm the model number and quantity required before ordering. Verify that a 120 V supply is available and confirm total wattage for the run so circuit loads and any driver requirements are properly planned.

• Measure the installation run and confirm that a 10 ft, 8 in continuous length meets project requirements
• Confirm electrical access for hardwired installation and consult a qualified electrician for connection
• Verify total wattage if combining multiple runs or fixtures on the same circuit

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W10-8-12-930/HW Custom Cut 10-ft, 8-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 3000K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.