Nora Lighting NUTP13-W10-8-12-927/HW Custom Cut 10-ft, 8-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

The Nora Lighting NUTP13-W10-8-12-927/HW is a 120 V continuous LED tape light cut to 10 ft, 8 in that delivers 330 lumens at 3.6 watts per foot and a warm 2700K color temperature.

This SKU includes mounting clips and an 8-foot hardwired power cord for direct connection to a 120 V supply; it is intended for applications where a continuous, low-profile linear light source is required.

Key Features

• Continuous LED tape light configured to a 10 ft, 8 in length (custom cut SKU)
• Output: 330 lm at 3.6 W per foot
• Color temperature: 2700K (warm white)
• Operates on 120 V with an 8' hardwired power cord included
• Includes mounting clips for surface installation

Function & Intended Use

The NUTP13-W10-8-12-927/HW is a continuous LED tape light designed to provide linear accent or task illumination in residential and commercial interiors. Its low-profile form factor is suitable for under-cabinet runs, coves, shelving, and other applications requiring a consistent linear light source.

• Designed for continuous runs rather than segmented fixtures
• Supplied as a single, custom-cut 10 ft, 8 in length (per this SKU)

Light Output & Color

This fixture delivers 330 lumens at 3.6 watts per foot with a warm 2700K color temperature. Use these values to confirm the brightness and warmth appropriate for your project.

• Lumen output: 330 lm (per foot at rated wattage)
• Power density: 3.6 W per foot
• Color temperature: 2700K (warm white)

Electrical Requirements

The tape light is configured for 120 V operation and ships with an 8-foot hardwired power cord for direct connection to a 120 V supply. Confirm driver voltage and wattage headroom when planning longer runs or integrating with additional tape segments or drivers.

• Operating voltage: 120 V
• Includes 8' hardwired power cord for direct 120 V connection
• Confirm driver capacity and wattage headroom for run length

Mounting & Installation Notes

This SKU includes mounting clips for surface installation. Installation requires appropriate wiring access to a 120 V circuit and should follow local electrical codes.

• Includes mounting clips
• Hardwired power cord requires connection to a 120 V supply
• Confirm installation method and clearances for continuous tape runs

Specifications

Use the following specification block for planning, quoting, and installation. Confirm model number and project requirements before ordering.

• Model / SKU: NUTP13-W10-8-12-927/HW
• Series: NUTP13-W10
• Length: 10 ft, 8 in (custom-cut SKU)
• Lumens: 330 lm
• Wattage: 3.6 W (per foot)
• Voltage: 120 V
• Color Temperature: 2700 K
• Included: mounting clips, 8' hardwired power cord

Before You Order

Confirm the model number, required length, and quantity before ordering. Verify driver voltage and wattage headroom for your planned run and that you have access to a 120 V supply for the hardwired connection.

• Verify NUTP13-W10-8-12-927/HW is the exact SKU required
• Confirm length and lumen/wattage requirements for your design
• Ensure appropriate 120 V power access and compliance with local electrical codes

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W10-8-12-927/HW Custom Cut 10-ft, 8-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.