Nora Lighting NUTP13-W10-4-12-927/HW Custom Cut 10-ft, 4-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord

Product Overview

The Nora Lighting NUTP13-W10-4-12-927/HW is a 10 ft 4 in continuous LED tape light configured for 120 V hardwired connection. It delivers 330 lumens at 3.6 watts per foot with a warm 2700K color temperature.

This SKU ships with mounting clips and an 8-foot hardwired power cord and is offered as a custom-cut, continuous-run tape light for professional lighting installations.

Key Features

• Output: 330 lumens at 3.6 W per foot
• Color temperature: 2700K (warm white)
• Designed for 120 V hardwired supply; includes 8' hardwired power cord
• Includes mounting clips for surface installation
• Custom-cut continuous tape format — model NUTP13-W10-4-12-927/HW

Function and intended use

The NUTP13-W10-4-12-927/HW is a continuous-format LED tape light intended for linear lighting applications where a warm, low-glare accent or task illumination is required. It is supplied as a 10-foot, 4-inch run and is designed for professional installations that use a 120 V hardwired connection.

• Suitable for under-cabinet, toe-kick, cove, and trim lighting where a continuous linear appearance is desired
• Custom-cut continuous format for runs that require seamless linear output

Performance and light output

This tape light produces 330 lumens at 3.6 watts per foot and has a color temperature of 2700K for warm white light. Use these values to estimate overall lumen output for the installed run length.

• Lumen output: 330 lm (specified for the product — use run-length math to determine total lumen output)
• Wattage: 3.6 W (per foot)
• Color: 2700K warm white

Electrical and compatibility notes

The NUTP13-W10-4-12-927/HW is specified for connection to a 120 V supply. Confirm driver voltage and wattage headroom for the total run before installation to ensure the supply and any associated drivers meet the installation requirements.

• Rated for 120 V hardwired connection (includes an 8-foot hardwired power cord)
• Confirm required driver/wattage headroom for your run length and power source prior to ordering and installation

Mounting and included components

This SKU includes mounting clips and an 8' hardwired power cord to support surface mounting and direct connection to building power. Verify mounting method and clearances required for the chosen installation location.

• Includes mounting clips for secure surface attachment
• Includes 8-foot hardwired power cord for connection to 120 V supply

Before You Order

Confirm the model number and quantity required before ordering. Verify that a 120 V supply and adequate driver/wattage headroom are available for your planned run length and installation.

• Confirm NUTP13-W10-4-12-927/HW is the correct SKU for your project
• Verify 120 V supply and driver/wattage headroom for the total run length
• Confirm mounting clearances and suitability of included mounting clips for the installation surface

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NUTP13-W10-4-12-927/HW Custom Cut 10-ft, 4-in 120V Continuous LED Tape Light, 330lm / 3.6W per foot, 2700K, w/ Mounting Clips and 8' Hardwired Power Cord. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.