Nora Lighting NHIOICDCP-48LE3 4" Iolite LED Dedicated Chicago Plenum New Construction Housing, 13W, 120V input; Triac / ELV dimming

Product Overview

The Nora Lighting NHIOICDCP-48LE3 is a 4-inch dedicated Iolite LED recessed housing for new-construction installations. It is specified at 13 W with a 120 V input.

The housing is described for new-construction mounting and is intended to be installed before the ceiling finish. The product data notes compatibility with TRIAC dimmers.

Key Features

• 4 in aperture dedicated Iolite LED recessed new-construction housing
• 13 W input power at 120 V
• Works with TRIAC dimming (line-voltage phase-cut) as noted in product data
• Designed for new-construction mounting (install before ceiling finish)
• Part of the NHIOICDCP-48L series

Function and intended use

The NHIOICDCP-48LE3 is a dedicated 4-inch recessed housing described for use with Nora's Iolite LED fixtures in new-construction ceilings. It provides the enclosure for installing the corresponding LED trim and module prior to finishing the ceiling.

The supplied product data identifies this SKU as new-construction housing; it does not state remodel or specific IC/fire ratings.

• Dedicated to Iolite LED fixtures (4 in aperture) as described
• Intended for installation during new-construction (before ceiling finish)

Electrical and dimming compatibility

Product data lists the housing with a 120 V input and a 13 W specification. The listing indicates TRIAC dimming compatibility (line-voltage phase-cut).

Select a dimmer that is rated for the LED load and confirm compatibility with the complete Iolite LED trim and driver; the product data advises pairing with a TRIAC-control dimmer.

• Input voltage: 120 V (as listed)
• Rated input power: 13 W (as listed)
• Dimming type: TRIAC (phase-cut) per product data; verify dimmer compatibility with the full fixture assembly

Mounting and installation overview

This housing is intended for new-construction installation, meaning it is installed while the ceiling framing is accessible and before ceiling materials are finished.

Specific mounting details (brackets, clearances), trim compatibility, and any required electrical connections should be confirmed with the Iolite LED fixture documentation and local codes; those details are not provided in the product data.

• Install during new-construction phase (before ceiling finish)
• Confirm exact trim and mounting requirements against Iolite LED documentation

Typical applications

The product data lists common uses in new-construction residential and commercial ceilings for general and accent recessed lighting where a 4-inch dedicated Iolite LED solution is specified.

Verify trim, site conditions, and dimmer selection before specifying for a project.

• New-construction residential ceilings
• Commercial ceilings during build-out
• Accent and general recessed lighting when specifying a 4" Iolite LED solution

Before You Order

Confirm the model number and verify trim and Iolite LED module compatibility before ordering.

• Confirm NHIOICDCP-48LE3 is the correct new-construction housing for your Iolite LED trim.
• Verify TRIAC/phase-cut dimmer compatibility with the complete LED fixture assembly.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Nora Lighting NHIOICDCP-48LE3 4" Iolite LED Dedicated Chicago Plenum New Construction Housing, 13W, 120V input; Triac / ELV dimming. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.