Morris 90987 Offset Solid Pin Terminal, 4/0 AWG Wire / 2/0 AWG Pin

Product Overview

The Morris 90987 is an offset solid pin terminal connector designed to terminate a 4/0 AWG aluminum or copper conductor to a 2/0 AWG solid pin.

It features a tin‑plated aluminum barrel pre‑filled with oxide inhibitor and is supplied with an EPDM insulating cover. The terminal is rated for 600 volts and includes die index and crimp marks on the barrel for installation guidance.

Key Features

• Offset solid pin design for adapting larger conductors to smaller equipment pins
• All‑aluminum, tin‑plated barrel suitable for aluminum and copper conductors
• Barrel pre‑filled with oxide inhibitor
• Die index and crimp marks on barrel for reliable crimp positioning
• Supplied with EPDM insulating cover
• Rated 600 V

What this terminal does

This offset solid pin terminal adapts a larger stranded conductor to a smaller solid equipment pin. It is intended to land 4/0 AWG conductors into a 2/0 AWG style pin on breakers, switches, panelboards, or lug terminals.

Materials and conductor compatibility

The barrel is all‑aluminum and tin‑plated to permit use with either aluminum or copper conductors. The tin plating helps provide a compatible bearing surface for copper while the aluminum body maintains conductivity for aluminum conductors.

• Conductor sizes: accepts 4/0 AWG conductor
• Pin size: designed for a 2/0 AWG solid pin
• Finish: tin‑plated aluminum barrel

Electrical rating

The terminal is rated to 600 volts. Use within the intended voltage class and system requirements.

• Voltage rating: 600 V

Installation and crimp guidance

Install by stripping the conductor to the appropriate length, fully inserting the conductor into the marked barrel, and crimping with the die indicated by the barrel's die index and crimp marks. After crimping, slide the supplied EPDM insulating cover over the completed connection.

• Barrel includes die index and crimp marks for correct crimp location
• Barrel is pre‑filled with oxide inhibitor to help protect the conductor interface
• Supplied with an EPDM insulating cover—slide over connection after crimping

Typical applications

Used to adapt larger conductors for landing on equipment pins where a 2/0 AWG pin is present. Commonly applied on breaker, switch, and panelboard terminations and where lug terminals require a solid pin interface.

Before You Order

Confirm the Morris 90987 catalog number and required quantity before ordering.

• Verify conductor type (aluminum or copper) and that the application requires a 4/0 AWG to 2/0 AWG offset solid pin terminal
• Confirm the 600 V rating meets your system requirements

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 90987 Offset Solid Pin Terminal, 4/0 AWG Wire / 2/0 AWG Pin. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.