Morris 90324 Copper Split Bolt, 2/0 AWG

Product Overview

The Morris 90324 is a copper split bolt for splicing and tapping copper and copper-weld stranded conductors. Its listed main conductor size is 2/0 AWG, and its stated conductor range is 2/0–14 AWG.

The connector is made from copper with an electro-tin-plated finish. It is rated 600V and UL467 listed for direct burial and grounding and bonding.

Key Features

• For copper and copper-weld stranded conductors within the stated 2/0–14 AWG range
• Copper construction with electro-tin plating
• UL467 listed for direct burial and grounding and bonding
• 600V rating; installation torque is 385 in-lb

Splicing and Tapping Copper Conductors

The Morris 90324 is intended for copper-to-copper splicing and tapping, including grounding and bonding connections. It is listed for copper and copper-weld stranded wires only.

The catalog identifies 2/0 AWG as the main conductor size and gives a conductor range of 2/0–14 AWG.

Copper Construction and UL467 Listing

This split bolt is machined from copper and electro-tin plated. It is rated 600V and UL467 listed for direct burial and grounding and bonding.

• Material: copper
• Finish: electro-tin plated
• Voltage rating: 600V
• Listing: UL467

Installation Torque

Place the run and tap conductors between the bolt and strap, then tighten the nut to 385 in-lb with a wrench.

Direct-Burial Use

The 90324 is identified for direct burial in soil and concrete. Its stated direct-burial use is part of its UL467 listing.

Before You Order

Confirm the model number and quantity required before ordering.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 90324 Copper Split Bolt, 2/0 AWG. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.