Morris 89236 Range Cord, 50A 4-Wire, 6/2+8/2 SRDT, 4 ft (NEMA 14-50P)

Product Overview

The Morris 89236 is a 4 ft appliance cord designed for 125/250V, 50A service. It uses 6/2 + 8/2 round SRDT conductors, thick vinyl insulation, and a right‑angle NEMA 14‑50P male plug.

This 4‑wire cord provides two hot conductors, a neutral, and a dedicated equipment ground to meet the wiring needs of modern electric ranges, stoves, and Level‑2 EV charging equipment that specify a 14‑50 connection.

Key Features

• 50A, 125/250V rating for 14‑50 applications
• 4‑wire configuration: two hots, neutral and ground
• 6/2 + 8/2 round SRDT conductors with thick vinyl insulation
• Right‑angle NEMA 14‑50P male plug
• 4 ft overall length for short appliance connections

What this cord does

The Morris 89236 is a purpose‑built appliance cord that provides a 50 amp, 125/250 volt connection between a compatible appliance or EV charging device and a matching 14‑50R receptacle. Its 4‑wire configuration supplies two hot legs, a neutral, and a dedicated equipment ground.

Typical applications

Use this cord to connect appliances and equipment that require a NEMA 14‑50 plug and a 4‑wire 50A circuit.

• Electric ranges and stoves specifying a 14‑50 connection
• Level‑2 EV chargers that accept a NEMA 14‑50P plug (verify charger acceptance before purchase)

Electrical rating and wiring

Confirm compatible circuit and appliance requirements before use. The cord is rated for 50A at 125/250V and includes conductors sized as 6/2 + 8/2 round SRDT.

• Rating: 50A, 125/250V
• Conductor arrangement: two hot conductors, neutral, and ground

Plug and connections

The Morris 89236 is fitted with a right‑angle NEMA 14‑50P male plug. Terminals on the appliance end are intended to be attached to the two hots, the neutral, and the ground prior to plugging into the 14‑50R outlet.

• Plug type: NEMA 14‑50P (right‑angle)
• Appliance-side termination: wires are intended to be connected to appliance terminals (attach hots, neutral, and ground)

Length, materials and construction

This SKU is a 4 ft cord constructed from round SRDT conductors with thick vinyl insulation for durability in typical appliance installations.

• Overall length: 4 ft
• Wire: 6/2 + 8/2 round SRDT
• Insulation: thick vinyl

Installation notes

Installation requires attaching the cord conductors to the appliance terminals (two hots, neutral, ground) and plugging the NEMA 14‑50P into a properly installed 14‑50R receptacle. Confirm the appliance's terminal layout and local electrical codes before installation.

• Confirm model number and terminal layout of the appliance before connecting
• Install only on circuits and receptacles rated for 50A, 125/250V
• Use a qualified electrician if uncertain about wiring or code compliance

Before You Order

Confirm the model number and quantity required before ordering. Ensure your appliance or EV charger accepts a NEMA 14‑50P plug and that the destination receptacle and circuit are properly rated for 50A, 125/250V.

• Verify appliance terminal layout for two hots, neutral, and ground.
• Confirm compatibility with your EV charger if planning charging use.
• Consult a licensed electrician for installation or code questions.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 89236 Range Cord, 50A 4-Wire, 6/2+8/2 SRDT, 4 ft (NEMA 14-50P). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.