Morris 68176 Heavy-Wall Heat Shrink Tubing, 3.54" → 1.18", 4 ft
Description
Product Overview
Morris 68176 is black heavy‑wall heat shrink tubing supplied at 3.54" expanded diameter that recovers to 1.18" (3:1 shrink ratio).
The 4 ft length includes a thermoplastic adhesive liner and is specified for insulating and protecting 800 MCM–1250 MCM cable joints, splices, and terminations with a 600–1000V, 90°C continuous rating.
Key Features
- 3:1 shrink ratio — 3.54" expanded → 1.18" recovered
- 4 ft length with thermoplastic adhesive liner for environmental sealing
- Heavy‑wall construction (0.16" nominal wall thickness)
- Rated 600–1000V at 90°C continuous use
- Continuous operating temperature range −67°F to 230°F (−55°C to 110°C)
- Shrink temperature 248°F (120°C)
- Black color; corrosion- and chemical-resistant material per product description
What this tubing does
Morris 68176 heavy‑wall heat shrink tubing provides mechanical protection, electrical insulation, and environmental sealing for large cable joints and terminations. The product description notes the heavy‑wall construction and adhesive liner as features for improved performance in buried and underground installations compared with medium wall.
- Forms an insulated, corrosion‑ and chemical‑resistant jacket over splices and terminations
- Thermoplastic adhesive liner helps create a sealed interface to exclude moisture and contaminants
Where to use it
This SKU is specified for use on 800 MCM to 1250 MCM cable sizes and is described for cable joints, splices, and terminations, including direct burial and underground installations.
- Recommended cable range: 800 MCM–1250 MCM
- Typical applications: cable joints, splices, terminations, direct burial/underground as listed in product details
Electrical and temperature performance
The tubing is rated for 600–1000V and continuous operation at 90°C. The specified continuous operating temperature range is −67°F to 230°F (−55°C to 110°C). The listed shrink activation temperature is 248°F (120°C).
- Voltage rating: 600–1000V
- Continuous use temperature: 90°C
- Operating range: −67°F to 230°F (−55°C to 110°C)
- Shrink temperature: 248°F (120°C)
Size and fit details
Compare the expanded and recovered diameters and wall thickness with your cable and joint dimensions to confirm fit.
- Expanded (nominal) diameter: 3.54 inches
- Recovered diameter: 1.18 inches
- Wall thickness (nominal): 0.16 inches
- Length: 4 ft
- Shrink ratio: 3:1
Basic installation steps
Slide the tubing over the joint or splice before final assembly when possible. Apply heat evenly from the center outward until the tubing fully recovers and the adhesive liner flows at the ends to form a seal.
- Position tubing over the joint prior to final assembly when practicable
- Apply heat uniformly to avoid trapping air or creating uneven seals
- Heat until tubing recovers to its final diameter and adhesive flows at the ends
Before You Order
Confirm the model number and cable size range to ensure this tubing meets your application requirements.
- Verify final joint/termination diameter with connectors and insulation in place to ensure proper fit
- This SKU is supplied as a single 4 ft piece
Ordering from Lumera Electric
Check the purchasing options shown on the Lumera Electric product page for Morris 68176 Heavy-Wall Heat Shrink Tubing, 3.54" → 1.18", 4 ft. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.
Specifics
| Brand | Morris |
|---|---|
| SKU | 68176; '68176 |
| Type | Heavy Wall Heat Shrink Tubing |
| Cable Range | 800 MCM – 1250 MCM |
| Expanded Diameter | 3.54 in |
| Recovered Diameter | 1.18 in |
| Wall Thickness | 0.16 in |
| Shrink Ratio | 3:1 |
| Length | 4 ft |
| Adhesive Liner | Yes (Thermoplastic) |
| Rated Voltage | 600–1000V |
| Continuous Temperature Rating | 90°C |
| Operating Temperature | −67°F to 230°F (−55°C to 110°C) |
| Shrink Temperature | 248°F (120°C) |
| Finish | Black |
Comments






