Morris 68172 Heavy-Wall Heat Shrink Tubing, 2.00" → 0.63", 4 ft

(No Ratings)
SKU: 68172
Price: $94.46
Free shipping on orders over $1,500

Description

Product Overview

Morris 68172 is a black heavy-wall heat shrink tube supplied in a 4 ft length. It expands to 2.00" and recovers to 0.63" (3:1 shrink ratio) and includes a thermoplastic adhesive liner for environmental sealing.

Intended for insulating and protecting 250 MCM–500 MCM cable joints, splices, and terminations, the tubing is rated 600–1000V at 90°C continuous use and is described as corrosion- and chemical-resistant.

Key Features

  • 3:1 shrink ratio — 2.00" expanded to 0.63" recovered
  • Heavy-wall construction (0.16" wall thickness)
  • 4 ft length with thermoplastic adhesive liner for environmental protection
  • Rated 600–1000V, 90°C continuous temperature rating
  • Operating temperature range: -67°F to 230°F (-55°C to 110°C)
  • Shrink activation temperature: 248°F (120°C)
  • Black color

What this tubing does

Morris 68172 provides electrical insulation, mechanical protection, and environmental sealing for cable joints, splices, and terminations. The heavy-wall construction plus adhesive liner create a sealed interface intended to protect connections from moisture and contaminants.

Intended applications

This tubing is specified for use on 250 MCM–500 MCM cable joints and terminations. The product description identifies direct-burial and underground installations among its typical uses.

Electrical and thermal performance

Rated voltage: 600–1000V. Continuous temperature rating: 90°C. Operating temperature range: -67°F to 230°F (-55°C to 110°C). Shrink activation temperature: 248°F (120°C). Use these ratings to determine suitability for your application environment.

Installation overview

Slide the tubing over the prepared joint or splice. Apply heat evenly from the center outward until the tubing has fully recovered and the adhesive liner flows from the ends to form a sealed interface.

  • Heat evenly to promote uniform recovery and adhesive flow
  • Monitor shrink progress and stop heating once full recovery and adhesive flow are achieved

Key dimensions and physical properties

Use these dimensions to confirm fit and selection.

  • Cable range: 250 MCM–500 MCM
  • Expanded diameter: 2.00"
  • Recovered diameter: 0.63"
  • Wall thickness: 0.16"
  • Length: 4 ft
  • Adhesive liner: Thermoplastic
  • Color: Black
  • Shrink ratio: 3:1

Before You Order

Verify the expanded and recovered diameters match the cable and clearances in your application.

  • Confirm the product catalog number and quantity needed.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 68172 Heavy-Wall Heat Shrink Tubing, 2.00" → 0.63", 4 ft. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.

Specifics

BrandMorris
SKU68172; '68172
TypeHeavy Wall Heat Shrink Tubing
Cable Range250 MCM - 500 MCM
Expanded Diameter2.00"
Recovered Diameter0.63"
Wall Thickness0.16"
Shrink Ratio3:1
Length4 ft
Adhesive LinerThermoplastic
Rated Voltage600-1000V
Continuous Temperature Rating90°C
Operating Temperature-67°F to 230°F (-55°C to 110°C)
Shrink Temperature248°F (120°C)
FinishBlack

Comments

Morris 68172 Heavy Wall Heat Shrink Tubing

Morris 68172 Heavy-Wall Heat Shrink Tubing, 2.00" → 0.63", 4 ft

Price: $94.46
Free shipping on orders over $1,500