Morris 68170 Heavy-Wall Heat Shrink Tubing, 1.50" → 0.47", 4 ft
Description
Product Overview
Morris 68170 is a black heavy-wall, adhesive-lined heat-shrink tubing supplied in a 4 ft length. It expands to 1.50" and recovers to 0.47" at a 3:1 shrink ratio for use on 2/0 AWG–350 MCM cable joints, splices, and terminations.
The tubing includes a thermoplastic adhesive liner for environmental sealing and is specified with electrical and temperature ratings shown below.
Key Features
- 3:1 shrink ratio — 1.50" expanded to 0.47" recovered
- Heavy-wall construction with 0.16" wall thickness (recovered)
- Thermoplastic adhesive liner included (4 ft length)
- Voltage rating: 600–1000V; continuous temperature rating: 90°C
- Operating temperature range: -67°F to 230°F (-55°C to 110°C)
- Shrink (recovery) temperature: 248°F (120°C)
- Black color
What this tubing does
Morris 68170 heavy-wall heat shrink tubing provides mechanical protection and environmental sealing for cable joints, splices, and terminations. The adhesive liner is intended to create an environmental seal when the tubing is recovered.
Recommended applications
Specified for use on 2/0 AWG through 350 MCM cable for insulating and protecting joints, splices, and terminations. The product description lists suitability for direct-burial and underground installations.
- Cable range: 2/0 AWG – 350 MCM
- Intended for cable joints, splices, and terminations
- Described for direct-burial and underground use
Voltage and temperature ratings
Use the following electrical and thermal ratings to confirm compatibility with your application.
- Voltage rating: 600–1000V
- Continuous temperature rating: 90°C
- Operating temperature range: -67°F to 230°F (-55°C to 110°C)
- Shrink (recovery) temperature: 248°F (120°C)
Size and shrink performance
Key dimensional and material details are shown below to verify fit and performance.
- Expanded diameter: 1.50"
- Recovered diameter: 0.47"
- Wall thickness (recovered): 0.16"
- Shrink ratio: 3:1
- Length: 4 ft
- Color: Black
- Adhesive liner: Thermoplastic (included with the 4 ft length)
Installation summary
Slide the tubing over the joint or splice, center the sleeve, and apply heat evenly from the center outward until the tubing recovers and adhesive flows from the ends to form a seal.
- Apply heat until full recovery and adhesive flow are achieved
- Work from center toward ends to help avoid air entrapment
Before You Order
Confirm the model number and that expanded/recovered diameters and cable range match your needs.
- Verify compatibility with the specific cable sizes (2/0 AWG – 350 MCM)
- Ensure voltage and temperature ratings meet your project requirements
Ordering from Lumera Electric
Check the purchasing options shown on the Lumera Electric product page for Morris 68170 Heavy-Wall Heat Shrink Tubing, 1.50" → 0.47", 4 ft. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.
Specifics
| Brand | Morris |
|---|---|
| SKU | 68170; '68170 |
| Type | Heavy Wall Heat Shrink Tubing |
| Cable Range | 2/0 AWG - 350 MCM |
| Expanded Diameter | 1.50" |
| Recovered Diameter | 0.47" |
| Wall Thickness | 0.16" |
| Shrink Ratio | 3:1 |
| Length | 4 ft |
| Adhesive Liner | Yes (Thermoplastic) |
| Rated Voltage | 600–1000V |
| Continuous Temperature Rating | 90°C |
| Operating Temperature | -67°F to 230°F (-55°C to 110°C) |
| Shrink Temperature | 248°F (120°C) |
| Finish | Black |
Comments






