Morris 68086 Thin-Wall Heat Shrink Tubing, 0.827" → 0.390", 4 ft, Black
Description
Product Overview
Morris 68086 is a black polyolefin thin-wall heat shrink tubing supplied as a 4-foot stick. It has a 2:1 shrink ratio—0.827" expanded diameter recovering to 0.390"—and is rated for 600 V with continuous operation to 257°F (125°C).
The tubing is UL224 Recognized for insulating, bundling, splicing, and terminations when used on conductors that fit the recovered diameter.
Key Features
- Flexible polyolefin construction
- 2:1 shrink ratio: 0.827" → 0.390"
- 4-foot stick length
- 600 V rating
- Continuous operating temperature to 257°F (125°C)
- UL224 Recognized
- Black color
What this tubing is used for
Morris 68086 is intended for insulating, bundling, splicing, and providing strain relief or terminations on conductors and wire harnesses where the recovered diameter is appropriate.
- Insulating conductors and splices
- Bundling and organizing wire harnesses
- Strain relief at connector exits or terminations
- General-purpose protection in black color
Electrical rating and temperature limits
Use where a 600 V rating and continuous operation to 257°F (125°C) meet system requirements.
- Voltage rating: 600 V
- Continuous operating temperature: 257°F (125°C)
Expanded and recovered size (shrink ratio)
Select this SKU when components will fit within the expanded diameter and require a recovered diameter of approximately 0.390" after heating.
- Expanded diameter (before heating): 0.827"
- Recovered diameter (after heating): 0.390"
- Shrink ratio: 2:1
Installation guidance
Slide the tubing over the joint or area to be covered and apply heat evenly until the tubing recovers to the substrate.
- Use a controlled heat source such as a heat gun and move evenly along the length to avoid overheating localized areas
- Ensure the tubing contacts the substrate as it recovers to form a snug fit
Listings and recognized standards
This tubing is UL224 Recognized for use as insulating tubing and related applications where UL224 recognition is required.
- Listing: UL224 Recognized
Before You Order
Confirm the recovered diameter is appropriate for your conductor or assembly before ordering.
- Verify the 0.827" expanded diameter will slide over the components to be covered.
Ordering from Lumera Electric
Check the purchasing options shown on the Lumera Electric product page for Morris 68086 Thin-Wall Heat Shrink Tubing, 0.827" → 0.390", 4 ft, Black. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.
Specifics
| Brand | Morris |
|---|---|
| SKU | 68086 |
| Product Type | Thin Wall Heat Shrink Tubing |
| Expanded Diameter | 0.827" |
| Recovered Diameter | 0.390" |
| Shrink Ratio | 2:1 |
| Length | 4 ft |
| Finish | Black |
| Rated Voltage | 600 V |
| Operating Temperature | 257°F (125°C) |
| Certifications | UL224 Recognized |
Comments






