Morris 52313 PVC Conduit Bender (Pipe Spring), 1"

Product Overview

The Morris 52313 is a 1" PVC conduit bending spring designed to be inserted into 1" Schedule 40 PVC conduit so you can form permanent bends up to 90° without the pipe collapsing.

The spring lets you create offsets and 90° bends across your knee without using heat guns or heating blankets, reducing the need for additional PVC fittings.

Key Features

• Designed for 1" Schedule 40 PVC conduit
• Forms permanent bends up to 90° without collapsing the pipe
• Eliminates the need for heat guns or heating blankets
• Reduces use of additional PVC fittings
• Recommended ambient temperature above 60°F for bending

What this tool does

The Morris 52313 is a conduit bending spring sized for 1" Schedule 40 PVC. Inserted inside the conduit, the spring supports the pipe wall while you bend the conduit, allowing permanent bends up to 90° without the wall collapsing.

• Intended for forming offsets and 90° bends in 1" Schedule 40 PVC conduit
• Designed to avoid heating the pipe during bending

Common applications

Use this pipe spring when you want to shape 1" Schedule 40 PVC conduit in the field without additional fittings or heat. Typical uses include running conduit around obstacles and creating offsets in conduit runs.

• Field bending of 1" Schedule 40 PVC conduit
• Reducing the number of couplings and elbows in a run

How to use

The spring is used by inserting it into the length of PVC to be bent, making the desired bend (commonly across your knee), and then withdrawing the spring once the bend is formed.

• Insert the spring fully into the conduit section to be bent
• Bend the conduit to the desired angle (up to 90°) using body leverage
• Withdraw the spring after the bend is formed

Limitations and conditions

This product is specifically for 1" Schedule 40 PVC conduit and requires ambient temperatures above 60°F for effective bending. It is not a substitute for heating methods where the manufacturer of the conduit or job conditions require heat.

• Compatible only with 1" Schedule 40 PVC (do not use with other pipe sizes or materials)
• Ambient temperature must be above 60°F for recommended performance

Before You Order

Confirm the model number and that you need a bending spring specifically for 1" Schedule 40 PVC before ordering.

• This SKU is for a 1" PVC conduit bending spring only.
• Ensure ambient temperature at the work site will be above 60°F when performing bends.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 52313 PVC Conduit Bender (Pipe Spring), 1". For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.