Morris 52312 PVC Conduit Bender (Pipe Spring), 3/4"

Product Overview

The Morris 52312 is a bending spring sized for 3/4" Schedule 40 PVC. Insert it into the pipe, bend the conduit across your knee or against a form to the desired angle, then remove the spring to leave a permanent bend.

It lets you form offsets and bends up to 90° without heating the pipe, reducing the need for extra fittings for many field bends.

Key Features

• Fits 3/4" Schedule 40 PVC conduit
• Enables permanent bends up to 90° without collapse of the pipe
• Avoids the need for heat guns or heating blankets for the specified application
• Can reduce the number of fittings needed for offsets and bends
• Recommended ambient temperature: above 60°F

What this tool does

The Morris 52312 is a spring designed to be inserted inside 3/4" Schedule 40 PVC conduit to support the pipe while bending. It helps preserve the conduit’s internal shape so you can form offsets and bends up to 90° without the conduit collapsing.

• Creates permanent bends and offsets in 3/4" Schedule 40 PVC
• Supports the conduit internally during manual bending

Suitable applications

Use this spring when forming offsets or bends in 3/4" Schedule 40 PVC conduit where heat-based methods are not desired. Typical uses include field or shop bending to navigate around obstacles or change elevation.

• Field bending of 3/4" Schedule 40 PVC conduit
• On-site shaping to reduce additional fittings for offsets

How to use the Morris 52312

Insert the spring into the PVC to the area to be bent, bend the pipe across your knee or around a suitable form to the desired angle (up to 90°), then withdraw the spring to leave the bend.

• Insert the spring before bending
• Bend conduit to the required angle (up to 90°)
• Remove the spring after forming the bend

Operating considerations and limits

This product is specified for use with 3/4" Schedule 40 PVC only. The manufacturer notes an ambient temperature recommendation of above 60°F for effective bending. Do not assume suitability for other pipe sizes or materials without separate confirmation.

• Intended for 3/4" Schedule 40 PVC only
• Recommended ambient temperature: above 60°F

Before You Order

Confirm the conduit is 3/4" Schedule 40 PVC and that a bending spring meets your job requirements before ordering.

• Verify conduit size is 3/4" Schedule 40 PVC
• Plan use where ambient temperature is above 60°F

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 52312 PVC Conduit Bender (Pipe Spring), 3/4". For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.