Morris 52311 PVC Conduit Bender (Pipe Spring), 1/2"

Product Overview

The Morris 52311 is a 1/2" PVC conduit bending spring designed to form permanent bends and offsets in 1/2" Schedule 40 PVC conduit. Insert the spring into the pipe, bend to the desired angle (up to 90°), then remove the spring.

This pipe spring eliminates the need for heat guns or heating blankets and reduces the number of fittings required when shaping conduit. Ambient temperature should be above 60°F for best results.

Key Features

• Designed for 1/2" Schedule 40 PVC conduit
• Creates permanent bends up to 90° without pipe collapsing
• No heat gun or heating blanket required
• Helps reduce the number of PVC fittings needed
• Simple insert‑bend‑withdraw installation

What this tool does

The Morris 52311 is a bending spring inserted into 1/2" Schedule 40 PVC conduit to support the pipe wall during manual bending. It enables permanent bends and offsets—up to 90°—without the pipe collapsing.

• Supports the inside of the conduit so the wall does not crease or collapse when bent
• Intended for forming offsets and 90° bends in 1/2" Schedule 40 PVC

Typical applications

Use this spring when routing or changing the direction of 1/2" Schedule 40 PVC conduit where welded or glued fittings would otherwise be required. It is suited to field bending tasks where permanent, smooth bends are preferred over multiple fittings.

• Field bending conduit runs to avoid extra couplings/elbows
• Creating offsets around obstacles where a smooth curve is desired

How to use

Insert the spring fully into the length of conduit to be bent, bend the pipe across your knee or against a suitable form to the desired angle, then withdraw the spring. The spring remains inside the conduit only during bending and is removed after achieving the required shape.

• Insert spring into conduit before bending
• Bend conduit across a knee or form to shape
• Withdraw spring after bend is formed

Usage limits and environmental note

This product is specified for 1/2" Schedule 40 PVC only. The manufacturer notes that ambient temperature should be above 60°F when bending to ensure proper results and avoid damaging the conduit.

• Designed specifically for 1/2" Schedule 40 PVC
• Recommended ambient temperature: above 60°F

Technical specifications

Quick reference for the exact SKU and basic material compatibility.

• Brand: Morris
• Catalog number / SKU: 52311
• Type: PVC conduit bending spring
• Pipe size: 1/2" (Schedule 40 PVC)
• Function: forms permanent bends up to 90°

Before You Order

Confirm the model number and quantity required before ordering. This spring is intended only for 1/2" Schedule 40 PVC; verify pipe type and size for compatibility.

• Verify pipe is Schedule 40 PVC and 1/2" diameter
• Ensure ambient temperature will be above 60°F during bending

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 52311 PVC Conduit Bender (Pipe Spring), 1/2". For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.