Morris 36090 Weatherproof Box, 1-Gang Deep, 3 Outlet Holes (1/2"), Gray
Description
Product Overview
The Morris 36090 is a 1-gang deep weatherproof box designed for outdoor and wet-location surface wiring. It is a seamless die-cast aluminum enclosure finished in gray powder coat.
This box features three threaded 1/2" conduit outlets, roughly 23.8 cubic inches of internal capacity, detachable mounting lugs, an installed ground screw, and included closure plugs.
Key Features
- Seamless die-cast aluminum construction for a rigid, durable enclosure
- Gray powder-coat finish for corrosion resistance in outdoor/wet locations
- Three threaded 1/2" conduit outlets with reinforced connector openings
- Includes closure plugs and detachable mounting lugs
- Installed ground screw and approximately 23.8 cu in capacity
- Individually packaged
Function and typical applications
This Morris 36090 weatherproof box provides a protected enclosure for surface-mounted outdoor or wet-location electrical devices such as receptacles, switches, and lighting connections.
The sealed die-cast body and included closure plugs let you use the threaded conduit outlets as needed while protecting unused openings.
- Suitable for surface-mounted outdoor receptacles and switches
- Intended for wet-location wiring where a rugged enclosure is required
Capacity and form factor
The enclosure is a 1-gang deep box with approximately 23.8 cubic inches of internal capacity, suitable for common single-gang device wiring and splices within that volume.
Confirm this capacity against your device and conductor fill requirements for compliance with applicable electrical codes.
- 1-gang deep configuration
- Internal capacity: 23.8 cu in
Conduit outlets, grounding, and included parts
The box includes three threaded 1/2" conduit outlets (1/2" hubs) with reinforced connector openings. Closure plugs are provided to seal unused outlets.
A ground screw is installed for equipment grounding; detachable mounting lugs are provided for surface attachment.
- 3 × threaded 1/2" conduit outlets
- Closure plugs included for unused openings
- Installed ground screw
- Detachable mounting lugs supplied
Materials and finish
Constructed from seamless die-cast aluminum, the box is finished with a gray powder coat to resist corrosion in outdoor environments.
The reinforced outlet openings improve durability where conduit fittings or connectors are installed.
- Material: die-cast aluminum
- Finish: gray powder-coat
Mounting and basic installation guidance
Mount the box to the surface using the detachable mounting lugs, run conduit into the threaded 1/2" outlets, and install closure plugs in any unused holes.
Bond the enclosure using the installed ground screw as part of the grounding path.
- Surface-mount with provided lugs
- Run conduit into 1/2" threaded outlets
- Use included closure plugs for unused openings
- Bond to installed ground screw
Before You Order
Confirm the model number and quantity required before ordering. Verify that the 1-gang deep size and 23.8 cu in capacity meet your device and conductor fill needs.
- Confirm conduit size and entry locations for your installation (3 × 1/2" outlets)
- Verify grounding and device compatibility with a qualified electrician or per local code
Ordering from Lumera Electric
Check the purchasing options shown on the Lumera Electric product page for Morris 36090 Weatherproof Box, 1-Gang Deep, 3 Outlet Holes (1/2"), Gray. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.
Specifics
| Brand | Morris |
|---|---|
| SKU | 36090; '36090 |
| Type | 1-Gang Deep Weatherproof Box |
| Gang | 1-Gang |
| Outlet Holes | 3 × 1/2" threaded conduit outlets |
| Closure Plugs | Included |
| Mounting Lugs | Included (detachable) |
| Material | Seamless die-cast aluminum |
| Finish | Gray powder coat |
| Capacity | 23.8 cubic inches |
| Pack Quantity | Individually packaged |
Comments






