Morris 36018 Weatherproof Box, 1-Gang, 3 Outlet Holes (3/4"), Gray
Description
Product Overview
The Morris 36018 is a 1‑gang weatherproof box engineered for surface‑mounted outdoor and wet‑location wiring. It features a seamless die‑cast aluminum body finished in gray powder coat, three threaded 3/4" conduit outlets, and an installed ground screw.
This SKU is supplied with closure plugs and reinforced connector outlets, but without mounting lugs. Interior capacity is 18.3 cubic inches—suitable for single‑gang receptacles, switches, or lighting terminations where a rugged, wet‑location enclosure is required.
Key Features
- Seamless die‑cast aluminum construction for durability
- Gray powder‑coat finish for corrosion resistance
- Three threaded 3/4" conduit outlets (3 total)
- Includes closure plugs for unused openings
- Installed ground screw and reinforced connector outlets
- 18.3 cubic inch interior capacity
- Supplied without mounting lugs; individually packaged
What this box is used for
The Morris 36018 serves as a surface‑mounted enclosure for a single gang device in outdoor and wet locations. Use it for receptacles, switches, and lighting terminations where a weather‑resistant, mechanical protection box is required.
It is designed to accept conduit runs into the three threaded outlets and to protect wiring and devices from exposure when installed per applicable electrical codes.
- Suitable for single‑gang outdoor receptacles, switches, and lighting fixtures
- Intended for wet and outdoor locations (use with appropriate covers and fittings as required by code)
Material, finish, and capacity
The enclosure is a seamless die‑cast aluminum body with a gray powder‑coat finish. The construction and finish provide corrosion resistance appropriate for outdoor use.
Interior capacity is 18.3 cubic inches, which is the available volume for conductors and device ingress inside the box.
- Material: die‑cast aluminum
- Finish: gray powder coat
- Capacity: 18.3 cubic inches
Conduit outlets, grounding, and mounting notes
The Morris 36018 includes three threaded 3/4" conduit outlets with reinforced connector openings. Closure plugs are supplied for any unused outlets. A ground screw is installed inside the box for equipment grounding.
This model is supplied without mounting lugs; mounting to the surface requires appropriate hardware or a matching mounting accessory not included with the box.
- Outlets: 3 × threaded 3/4" conduit hubs
- Closure plugs: included for unused outlets
- Grounding: installed ground screw
- Mounting lugs: not included — provide suitable mounting hardware
Installation overview
Mount the box to the intended surface using appropriate fasteners, run conduit into the threaded 3/4" outlets, install connectors as required, plug any unused outlets with the provided closure plugs, and bond equipment to the installed ground screw.
Follow all applicable electrical codes and the instructions for the devices and conduit fittings being installed. Confirm required cover and gasket selection for the device and environment.
- Mount box to surface; fasteners not supplied
- Run conduit into threaded 3/4" outlets and use proper connectors
- Bond wiring to the installed ground screw
- Use compatible weatherproof covers and gaskets as required
Before You Order
Confirm the model number and the number of boxes required before ordering. Verify that a 1‑gang enclosure with 3 × 3/4" conduit outlets and 18.3 cu in capacity meets your device and cable fill requirements.
- This product is supplied without mounting lugs—plan mounting hardware accordingly.
- Select an appropriate weatherproof cover, gasket, and conduit connectors to match the installed devices and local electrical code requirements.
Ordering from Lumera Electric
Check the purchasing options shown on the Lumera Electric product page for Morris 36018 Weatherproof Box, 1-Gang, 3 Outlet Holes (3/4"), Gray. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.
Specifics
| Brand | Morris |
|---|---|
| SKU | 36018; '36018 |
| Type | 1‑Gang Weatherproof Box |
| Gang | 1‑Gang |
| Outlet Holes | 3 × 3/4" threaded |
| Closure Plugs | Included |
| Mounting Lugs | Not included |
| Material | Die‑cast aluminum |
| Finish | Gray powder coat |
| Capacity | 18.3 cubic inches |
| Pack Quantity | Individually packaged |
Comments






