Morris 36004 Weatherproof Box, 1-Gang, 3 Outlet Holes (1/2"), Bronze
Description
Product Overview
The Morris 36004 is a 1-gang weatherproof box for surface-mounted outdoor and wet-location wiring. It has a seamless die-cast aluminum body with a bronze powder-coat finish and three threaded 1/2" conduit outlets.
The enclosure includes closure plugs, an installed ground screw, and reinforced connector outlets. It is supplied without mounting lugs and provides approximately 18.3 cubic inches of internal capacity.
Key Features
- Seamless die-cast aluminum construction
- Bronze powder-coat finish
- Three threaded 1/2" conduit outlets
- Closure plugs included
- Installed ground screw
- Reinforced connector outlets
- Approximately 18.3 cubic inches capacity
- Supplied without mounting lugs; individually packaged
What this box is used for
The Morris 36004 is intended for surface-mounted outdoor receptacles, switches, and lighting where a wet-location enclosure is required. It provides protected threaded conduit entries for a single-gang device.
- Suitable for outdoor and wet locations (as described by the product)
- Typical use: surface-mounted single-gang device terminations with conduit entries
Materials and finish
The box is made from seamless die-cast aluminum and finished with a bronze powder coat to provide corrosion-resistant surface protection.
- Die-cast aluminum body
- Bronze powder-coat finish
Conduit outlets, grounding and capacity
The enclosure provides three threaded 1/2" conduit outlets and includes closure plugs for unused openings. A ground screw is installed. The internal wiring capacity is listed as approximately 18.3 cubic inches.
- 3 threaded 1/2" conduit outlets
- Closure plugs included
- Ground screw installed
- Internal capacity: ~18.3 cubic inches
Installation considerations
Mount the box to the surface and run conduit into the threaded 1/2" outlets. Bond to the installed ground screw as required. Mounting lugs are not included with this unit.
- Supplied without mounting lugs — provide appropriate mounting hardware if required
- Conduit connectors and any required gasketing or seals may be needed separately
Before You Order
Verify that a 1-gang weatherproof box with three 1/2" threaded conduit outlets and no mounting lugs meets your installation needs.
- Mounting lugs are not included — plan for appropriate surface mounting hardware if needed
- Conduit connectors and any required gasketing or seals may be required separately depending on site conditions and local code
Ordering from Lumera Electric
Check the purchasing options shown on the Lumera Electric product page for Morris 36004 Weatherproof Box, 1-Gang, 3 Outlet Holes (1/2"), Bronze. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.
Specifics
| Brand | Morris |
|---|---|
| SKU | 36004; '36004 |
| Type | 1-Gang Weatherproof Box |
| Gang | 1-Gang |
| Outlet Holes | 3 x 1/2" (threaded) |
| Material | Die-Cast Aluminum |
| Finish | Bronze Powder Coat |
| Capacity | 18.3 Cubic Inch |
| Closure Plugs | Included |
| Mounting Lugs | Not Included |
| Ground Screw | Installed |
| Pack Quantity | Individually Packaged |
Comments






