Morris 31922 Twisted Polypropylene Pull Rope, 1/2" x 300 ft, 3780 lb with Pulling Eye

Product Overview

Morris 31922 is a low-friction, 3-strand twisted polypropylene pull rope sized 1/2" diameter by 300 ft with a rated tensile strength of 3,780 lb and a pre-formed pulling eye.

The rope has a non-sliver surface for hand handling, is waterproof (won’t rot or mildew), floats, and is UV resistant. It is designed for pulling conductors and cables through conduit and raceway.

Key Features

• 3-strand twisted polypropylene construction for low friction
• 1/2" diameter, 300 ft length
• Rated tensile strength: 3,780 lb
• Pre-formed pulling eye for secure conductor attachment
• Non-sliver surface—can be handled without gloves
• Waterproof (will not rot or mildew) and floats
• UV resistant

What this rope is for

The Morris 31922 is intended for pulling conductors and cables through conduit and raceway during installation. It is a dedicated pull rope rather than a general-purpose utility rope.

• Use to feed conductors and cables through electrical conduit and raceways.
• Pre-formed pulling eye provides a ready attachment point for conductors or leader lines.

Strength and handling

The rope has a rated tensile strength of 3,780 lb and a 1/2" diameter that balances strength with flexibility for conduit work. Its 3-strand twisted construction produces a low-friction surface that slides easily through conduit.

• Tensile strength: 3,780 lb (rated).
• Low-friction surface eases pulling through bends and long runs.
• Non-sliver finish allows handling without gloves in many situations.

Material properties and environmental resistance

Constructed from twisted polypropylene, the rope is waterproof and will not rot or mildew. It also floats and has UV resistance, making it suitable for outdoor or wet environments where those properties are needed.

• Material: twisted polypropylene.
• Waterproof—resists rot and mildew.
• Floats for use across water or damp sites.
• UV resistant for outdoor exposure.

How to use the rope

Basic use involves feeding the rope through the conduit, securing conductors to the pre-formed pulling eye, and pulling the conductors through. The pre-formed eye gives a dependable attachment point for taping or splicing leader lines.

• Feed rope through conduit before attaching conductors.
• Attach conductors or leader to the pre-formed pulling eye using appropriate connectors or tape.
• Pull steadily; use proper pulling equipment and follow site safety practices.

Technical specifications

The table below summarizes the measurable attributes of this exact SKU to aid selection and comparison.

• Brand: Morris
• Catalog No.: 31922
• Type: Pull Rope
• Diameter: 1/2"
• Length: 300 ft
• Tensile Strength: 3,780 lb
• Pulling Eye: Pre-formed
• Material: Twisted polypropylene

Before You Order

Confirm the model number and quantity required before ordering. This page describes the single SKU Morris 31922 — 1/2" x 300 ft with a pre-formed pulling eye and 3,780 lb tensile strength.

• Verify diameter and length meet your conduit and reach requirements.
• Confirm tensile strength is adequate for the planned pull and any intermediate bends or friction.
• If you need different lengths, diameters, or construction, select the appropriate product variant or consult specifications for alternate models.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 31922 Twisted Polypropylene Pull Rope, 1/2" x 300 ft, 3780 lb with Pulling Eye. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.