Morris 31920 Twisted Polypropylene Pull Rope, 3/8" x 1200 ft, 2430 lb with Pulling Eye

Product Overview

Morris 31920 is a 3-strand twisted polypropylene pull rope sized 3/8" by 1200 ft with a rated tensile strength of 2,430 lb and a pre-formed pulling eye.

Designed for pulling conductors and cables through conduit and raceway, the rope is low-friction, non-sliver (can be handled without gloves), waterproof, floats, and is UV resistant.

Key Features

• 3/8" diameter, 1200 ft length
• 2430 lb tensile strength
• Low-friction 3-strand twisted polypropylene construction
• Pre-formed pulling eye for easy attachment
• Non-sliver surface — can be handled without gloves
• Waterproof, will not rot or mildew; floats
• UV resistant

What it’s used for

The Morris 31920 is intended for pulling conductors and cables through conduit and raceway during installation. Use the rope to feed cable runs, then attach conductors to the pre-formed pulling eye and pull through.

• Typical application: conductor and cable pulling through conduit or raceway
• Pre-formed pulling eye provides a ready attachment point for cable grips or ties

Performance and tensile rating

This pull rope is rated with a tensile strength of 2,430 lb. The low-friction 3-strand twisted construction helps the rope slide through conduit with reduced snagging.

• Tensile strength: 2,430 lb
• Low-friction surface for easier pulls and reduced internal resistance

Material and durability

Constructed from twisted polypropylene, the rope is waterproof and resists rot and mildew. The non-sliver surface allows handling without gloves, and the material is UV resistant.

• Material: twisted polypropylene
• Waterproof — will not rot or mildew
• Floats and is lightweight
• UV resistant

Size and physical details

Confirm conduit compatibility by matching the rope’s diameter and handling needs to the conduit ID. The Morris 31920 is a single SKU supplied at a standard length and diameter.

• Diameter: 3/8"
• Length: 1200 ft
• Includes a pre-formed pulling eye

Basic use and attachment

Feed the rope through the conduit, secure conductors to the pre-formed pulling eye, and pull the bundle through. The pulling eye provides a fast, ready-made connection point; use appropriate cable grips, tape, or splice cones as required by your pulling method.

• Attach conductors to the pulling eye before pulling
• Use proper pulling hardware and techniques for long runs and bends

Before You Order

Confirm the model number and quantity required before ordering. Verify the 3/8" diameter and 1200 ft length are appropriate for the conduit runs and pulling equipment you will use.

• Confirm conduit inner diameter and bend radius compatibility with a 3/8" rope
• Ensure 2,430 lb tensile strength meets your pulling load and safety margins

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 31920 Twisted Polypropylene Pull Rope, 3/8" x 1200 ft, 2430 lb with Pulling Eye. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.