Morris 31908 Slick Pulling Tape, 3/4" x 3000 ft, 2500 lb Tensile

(No Ratings)
SKU: 31908
Price: $847.35
Free shipping on orders over $1,500

Description

Product Overview

The Morris 31908 is a flat, woven slick pulling tape (Mule tape style) designed to reduce friction when pulling conductors and cables through conduit and raceway.

This SKU is supplied as a 3/4" wide, 3000 ft roll with a rated tensile strength of 2500 lb.

Key Features

  • Flat woven construction with a low-friction slick finish
  • 3/4" width for manageable feeding and reduced binding in bends
  • 3000 ft length per roll for long pulls without splicing
  • 2500 lb tensile strength for pulling medium-to-large conductor runs

What it does

The Morris 31908 slick pulling tape provides a low-friction means to pull conductors and cable through conduit and raceway. Its flat, woven profile minimizes snagging and reduces the pulling force required compared with round ropes.

Typical applications

Use this pulling tape for pulling single conductors, multiconductor cables, and other wiring through conduit runs and raceways in electrical installations.

  • Conduit and raceway pulls
  • Long runs where splicing pulling line is undesirable
  • Jobs where reduced friction improves pull efficiency

Performance and strength

Select this SKU when you need a balance of length and rated strength for medium to large pulls. The specified tensile strength indicates the maximum pulling load the tape is rated to withstand.

  • Tensile strength: 2500 lb
  • Length per roll: 3000 ft

Installation and use

Attach the tape to a pulling grip, swivel, or cable leader before feeding through the conduit. The flat profile helps the tape track through bends and reduces friction against conduit walls.

  • Securely fasten tape to pulling hardware before applying load
  • Feed tape carefully to avoid kinks or folds that could reduce strength or cause snags

Dimensions and form factor

This product is a flat, woven tape intended to be handled and stored on a roll for deployment on-site.

  • Width: 3/4"
  • Roll length: 3000 ft
  • Flat, low-friction woven construction

Before You Order

Confirm the model number and quantity required before ordering. Use the tensile rating and length to ensure the tape meets the demands of your pull.

  • Verify that 2500 lb tensile strength is adequate for your conduit run and cable weight.
  • Confirm 3000 ft length per roll covers the run length you intend to pull.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 31908 Slick Pulling Tape, 3/4" x 3000 ft, 2500 lb Tensile. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.

Specifics

BrandMorris
SKU31908; '31908
Product TypePulling Tape
Width3/4"
Length3000 ft
Tensile Strength2500 lb
FinishSlick (low-friction)

Comments

Morris 31908 Pulling Tape

Morris 31908 Slick Pulling Tape, 3/4" x 3000 ft, 2500 lb Tensile

Price: $847.35
Free shipping on orders over $1,500