Morris 31906 Slick Pulling Tape, 1/2" x 3000 ft, 1250 lb Tensile

Product Overview

The Morris 31906 is a flat, slick woven pulling tape sized 1/2" x 3000 ft with a 1250 lb tensile rating.

Its flat, low-friction profile is intended to reduce drag when pulling conductors and cable through conduit and raceways.

Key Features

• Flat woven pulling tape (Mule Tape style)
• Low-friction slick finish
• 1250 lb tensile strength
• 3000 ft length per roll
• 1/2" (0.5 inch) width

Function and use

The Morris 31906 is intended for use as a pull line for pulling conductors and cable through conduit and raceways. The flat woven construction with a slick finish is described to reduce friction against conduit walls compared with non-flat lines.

• Provides a flat, low-friction pull line for conduit installations
• Used as the pull line between the feed point and the conductor bundle or pulling grip

Common applications

This product is for pulling conductors and cables through conduit and raceway systems where a strong, low-friction pulling tape is desired.

• Pulling single or multiple conductors through conduit
• General conduit and raceway cable pulls in residential and commercial settings

Technical specifications

Primary measurable attributes are listed to confirm suitability for your job and equipment.

• Width: 1/2" (0.5 inch)
• Length: 3000 ft per roll
• Tensile strength: 1250 lb
• Construction: flat woven pulling tape with a slick finish (Mule Tape style)

Attachment and pulling guidance

Attach the tape to a pulling grip, swivel, or conductor bundle using industry-standard methods before performing a pull.

• Use a swivel or swivel-type connector to help reduce twist between the tape and conductors
• Avoid shock loads that could approach or exceed the tape’s rated tensile strength

Before You Order

Confirm the model number, length, width, and tensile rating meet your job requirements before ordering.

• Verify 1/2" width and 3000 ft roll length suit your conduit runs
• Ensure 1250 lb tensile strength is sufficient for expected pull tensions

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 31906 Slick Pulling Tape, 1/2" x 3000 ft, 1250 lb Tensile. For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.