Morris 17476 Malleable Iron Rod Support Beam Clamp, 1-1/8"

Product Overview

The Morris 17476 is a malleable iron rod support beam clamp sized for 1-1/8" conduit or pipe. It secures conduit or pipe to beams, strut and other structural supports.

The clamp is zinc-plated and tapped on the bottom and back to accept threaded rods or other attachments used with conduit hangers, bridle rings and drop rods.

Key Features

• Trade size: 1-1/8" for conduit or pipe
• Material: malleable iron with zinc plating
• Tapped for rods on the bottom and back for 1/4" to 1/2" rod sizes (used with conduit hangers, bridle rings and drop rods)
• Simple installation—seat conduit in clamp and tighten the bolt against the support

What this clamp does

The Morris 17476 beam clamp secures conduit or pipe to structural supports such as steel beams or strut. It is intended for use with conduit hangers, bridle rings and drop rod assemblies to support runs of conduit or piping.

• Primary use: fasten conduit and pipe to beams, strut and other supports
• Designed to work with hangers and rod-supported suspension hardware

Materials and finish

This clamp is made from malleable iron and is zinc plated to provide general corrosion resistance appropriate for typical indoor commercial and industrial installations.

• Body material: malleable iron
• Finish: zinc plated

Installation and attachment points

Install the Morris 17476 by seating the conduit or pipe in the clamp and tightening the clamp bolt against the structural support. The design includes tapped holes on the bottom and back to accept threaded rods for suspension or to attach additional hardware.

• Tapped for rods on bottom and back
• Used with 1/4" to 1/2" rod sizes when used with compatible hangers and accessories
• Installation: seat conduit in clamp and tighten bolt against the support

Compatibility and common applications

Use this clamp where a 1-1/8" trade-size beam clamp is required to support conduit or pipe. It pairs with standard conduit hangers, bridle rings and drop rods; confirm accessory sizes before specifying.

• Trade size: 1-1/8" (sized for conduit/pipe of that nominal trade size)
• Commonly used with conduit hangers, bridle rings and drop rods

Before You Order

Confirm the model number and the trade size required for your conduit or pipe runs before ordering. Verify the rod diameter and accessory compatibility for hangers or drop rod assemblies.

• Confirm trade size: 1-1/8"
• Confirm required rod size and hanger/bridle ring compatibility before specifying

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 17476 Malleable Iron Rod Support Beam Clamp, 1-1/8". For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.