Morris 15381 Water-Tight Service Entrance Connector, 2"
Description
Product Overview
The Morris 15381 is a 2" compression-type water-tight service entrance (SEU) connector for terminating service entrance cable at boxes, panels, and enclosures.
Constructed of die-cast zinc and supplied with a rubber grommet, steel washer and locknut, the connector accepts two insulated conductors and one bare (U/flat style) conductor.
Key Features
- Compression-type SEU connector
- Trade size: 2"
- Die-cast zinc construction
- Accepts 2 insulated conductors and 1 bare conductor (U/flat style)
- Includes rubber grommet, steel washer and locknut
- Intended for wet-location terminations to enclosures, panels and outlet boxes
What this connector does
The Morris 15381 provides a watertight feed-through for service entrance cable into enclosures. It is a compression-type SEU connector designed to terminate and secure service conductors where a sealed entry is required.
- Creates a sealed transition from service cable/conduit to an enclosure knockout
- Intended to maintain enclosure integrity in wet locations
Where to use it
Use the 15381 to terminate service entrance cable at outlet boxes, panels, and enclosures on commercial and industrial installations where a watertight cable entry is required.
- For wet-location terminations to boxes, panels and enclosures
- Suitable for installations that require a compression-type SEU connector
Materials and assembly
The connector body is die-cast zinc and is supplied assembled with a rubber grommet and steel washer. A locknut is included to secure the connector to the enclosure.
- Body: Die-cast zinc
- Sealing: Rubber grommet included
- Hardware: Steel washer and locknut included
Basic installation guidance
Typical installation involves inserting the service cable or conduit into the connector and securing the connector to the enclosure knockout with the provided locknut. Follow applicable electrical codes and manufacturer instructions for final installation and tightening.
- Insert service cable or conduit into connector
- Secure connector to enclosure knockout using the provided locknut
- Consult manufacturer instructions and local electrical code for installation torque and grounding requirements
Before You Order
Verify that the 2" trade size and the conductor accommodation meet your site wiring and knockout dimensions.
- Confirm compatibility with the enclosure knockout and service cable size
- This listing describes a single SKU: Morris 15381 (2" connector)
Ordering from Lumera Electric
Check the purchasing options shown on the Lumera Electric product page for Morris 15381 Water-Tight Service Entrance Connector, 2". For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.
Specifics
| Brand | Morris |
|---|---|
| SKU | 15381; '15381 |
| Type | Water-Tight Service Entrance Connector (Compression SEU) |
| Trade Size | 2" |
| Material | Die-Cast Zinc |
| Conductors Accepted | 2 insulated conductors and 1 bare (U/flat style) |
| Included Items | Rubber grommet, steel washer, locknut |
| Product Type | Water-Tight Service Entrance Connector |
Comments






