Morris 15377 Water-Tight Service Entrance Connector, 1-1/2"
Description
Product Overview
The Morris 15377 is a 1-1/2" trade‑size water‑tight service entrance (SEU) connector for terminating service entrance cable to outlet boxes, panels and enclosures in wet locations.
Constructed of die‑cast zinc, the compression‑type connector ships assembled with a rubber grommet, steel washer and locknut and accepts two insulated conductors plus one bare (U/Flat style conductors only).
Key Features
- Compression‑type SEU connector for service entrance cable
- 1-1/2" trade size (fits corresponding knockout/conduit)
- Die‑cast zinc construction
- Accepts two insulated conductors and one bare conductor (U/Flat style only)
- Assembled with rubber grommet and steel washer; locknut included
- Rated for wet locations when installed as a water‑tight connector
What this connector does
The Morris 15377 provides a water‑tight, mechanical termination for service entrance (SEU) cable where it enters boxes, panels or enclosures. It compresses around the cable to form a weather‑resistant seal and secures the cable to the enclosure knockout.
- Designed specifically for connecting service entrance cable to service enclosures in wet locations
- Compression type provides a secure mechanical grip on the cable
Typical applications
Use this connector to terminate conduit or SEU cable at outlet boxes, meter cabinets, distribution panels and other enclosures on commercial and industrial jobs where a water‑tight entry is required.
- Intended for wet locations when installed correctly
- Common on service entrance and incoming cable terminations
Construction and compatibility
The connector is die‑cast zinc and ships assembled with a rubber grommet and steel washer. A locknut is included for securing the connector to the enclosure. It accepts two insulated conductors plus one bare conductor of U/Flat style only.
- Material: Die‑cast zinc
- Conductor acceptance: 2 insulated conductors and 1 bare conductor (U/Flat style only)
- Includes rubber grommet, steel washer and locknut
Installation summary
Install by inserting the SEU cable into the connector, tightening the compression assembly to form the seal, and securing the connector to the enclosure knockout with the included locknut.
- Insert conduit/cable and tighten connector to compress grommet
- Secure assembly to the knockout using the included locknut
- Follow local electrical code and best practices for service‑entrance terminations
Before You Order
Confirm the model number and quantity required before ordering. Verify the 1-1/2" trade size fits the knockout/conduit size on your enclosure and that U/Flat style conductor acceptance matches the service cable you plan to terminate.
- Confirm compatibility with your enclosure knockout and conduit system
- Ensure your service entrance conductors are U/Flat style as specified
- Follow all applicable local electrical codes for service entrance terminations
Ordering from Lumera Electric
Check the purchasing options shown on the Lumera Electric product page for Morris 15377 Water-Tight Service Entrance Connector, 1-1/2". For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.
Specifics
| Brand | Morris |
|---|---|
| SKU | 15377; '15377 |
| Type | Water‑Tight Service Entrance Connector (Compression SEU) |
| Trade Size | 1-1/2" |
| Material | Die‑Cast Zinc |
| Conductor acceptance | 2 insulated conductors + 1 bare (U/Flat style only) |
| Included Items | Rubber grommet, steel washer, locknut (assembled) |
| Variant price | $14.78 |
Comments






