Morris 14212 Aluminum EMT Set Screw Conduit Body LL Type, 1"

Product Overview

The Morris 14212 is a 1" LL‑type conduit body for EMT that provides conductor access for pulling, splicing and maintenance. It is die‑cast from high‑strength aluminum alloy and uses a set‑screw connection for EMT.

Designed with a flat back for close mounting to walls, the 14212 becomes rain‑tight when used with an appropriate gasketed cover.

Key Features

• Trade size: 1" (EMT)
• LL type conduit body for access at corners, pull points and splices
• Set‑screw connection for EMT
• Die‑cast high‑strength aluminum construction
• Flat back design for mounting close to walls
• Rain‑tight when installed with gasketed covers

Function and typical uses

The Morris 14212 LL‑type conduit body provides a service opening in an EMT raceway to facilitate pulling conductors, performing splices, and carrying out maintenance. Its LL configuration is suited for changes in direction and pull points at right‑angle turns.

• Used at pull points, corners and splice locations in an EMT conduit system
• Allows access to conductors without disturbing the run

Materials and design features

The body is die‑cast from a high‑strength aluminum alloy for durability in typical electrical installations. The flat back design allows the conduit body to be mounted close to walls or other flat surfaces.

• Die‑cast aluminum construction
• Flat back for close mounting
• Set‑screw connection sized for EMT

Installation and access

Install the conduit body in the conduit run at the required location, secure EMT with the set screw connection, pull conductors through the opening, and install a gasketed cover to achieve a rain‑tight assembly.

• Mount in the run at pull or splice locations
• Use a gasketed cover to make the assembly rain‑tight
• Provides access for conductor pulling and splicing

Key specifications

Reference the exact SKU when specifying or ordering to ensure compatibility with your conduit system.

• Brand: Morris
• Catalog number / SKU: 14212
• Type: Aluminum EMT set‑screw conduit body, LL type
• Trade size: 1"
• Material: Die‑cast aluminum

Before You Order

Confirm the model number and quantity required before ordering. Verify whether a gasketed cover is included or must be specified separately to achieve a rain‑tight assembly.

• Confirm Trade Size (1") matches your EMT conduit
• Specify gasketed cover if rain‑tight installation is required

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 14212 Aluminum EMT Set Screw Conduit Body LL Type, 1". For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.