Morris 14172 Aluminum EMT Set Screw Conduit Body T Type, 1"

Product Overview

The Morris 14172 is a 1" trade-size EMT set-screw conduit body in a T configuration. It is die-cast from aluminum alloy and provides access to conductors for pulling, splicing, and maintenance.

The flat back design allows mounting close to walls. When used with gasketed covers, the body can be made rain-tight.

Key Features

• Set-screw connection for EMT conduit
• Die-cast aluminum construction
• Flat back design for mounting close to walls
• Rain-tight when used with gasketed covers

What this conduit body does

The Morris 14172 provides a T-shaped access point in an EMT conduit run so conductors can be pulled, spliced, or inspected without disturbing adjacent conduit sections.

• Provides access for pulling and routing conductors
• Creates workspace for splicing and inspection
• Enables wiring changes or additions at the access point

Where to use it

Use the 14172 at pull points, corners, and splice locations within an EMT conduit system where a T-access is required.

• Pull points and intermediate access locations
• Splice locations in EMT conduit runs
• Situations where a flat back aids mounting near a wall or surface

Material and mounting details

The body is die-cast from aluminum alloy. The flat back profile allows mounting close to walls or structures for a compact installation.

• Material: Die-cast aluminum
• Flat back profile for close-to-wall mounting

Installation overview

Install the 14172 in the conduit run at the desired access point, secure EMT conduit with the set screws, pull conductors through the body, and install a gasketed cover when weather protection is required.

• Mount body in the run and secure EMT with set screws
• Pull conductors or perform splices inside the T body
• Use a gasketed cover to provide rain-tight protection when needed

Key specifications

Essential model and sizing details for quick verification.

• Brand: Morris
• Catalog No.: 14172
• Type: Aluminum EMT Set Screw Conduit Body, T Type
• Trade Size: 1"
• Material: Die-cast aluminum

Before You Order

Confirm the model number (14172) and 1" trade size match your conduit requirements.

• Verify you need a T-type access in your conduit run
• If a rain-tight installation is required, plan to use a gasketed cover with this body
• Confirm set-screw EMT connections match your installation practice

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 14172 Aluminum EMT Set Screw Conduit Body T Type, 1". For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.