Morris 14144 Aluminum EMT Set Screw Conduit Body LB Type, 1-1/2"

Product Overview

The Morris 14144 is a die‑cast aluminum EMT set‑screw conduit body of the LB configuration sized for 1-1/2" trade EMT. It provides an access point for pulling, splicing and maintenance in conduit runs.

Designed with a flat back for close wall mounting and made of high‑strength aluminum alloy. Covers with gaskets make the body rain‑tight.

Key Features

• LB type conduit body for pulling, splicing and accessing conductors
• Set‑screw connection for EMT conduit
• Die‑cast high‑strength aluminum construction
• Flat back design for mounting close to walls
• Rain‑tight when used with gasketed covers

What this conduit body does

The Morris 14144 LB conduit body provides an access point in an EMT conduit run for pulling conductors, making splices and performing maintenance. The LB configuration positions the access cover on the side, allowing conductor access around a 90° change in direction.

• Use at pull points, corners and splice locations in EMT systems
• Enables easier conductor pulling and future servicing

Material and physical design

This model is die‑cast from a high‑strength aluminum alloy and sized for 1-1/2" trade EMT. The body has a flat back for mounting close to walls or surfaces.

• Material: Die‑cast aluminum
• Trade size: 1-1/2"
• Flat back allows close mounting to walls

Typical applications

The 14144 is intended for use wherever an LB conduit body is needed in an EMT system. Typical uses include pull points, bends where conductor access is required, and locations where splices are made within the conduit run.

• Commercial and industrial EMT conduit installations
• Locations requiring periodic access for splicing or maintenance

Basic installation notes

Install the conduit body in the conduit run and secure EMT with the set‑screw connection. After pulling conductors through or making splices, install a gasketed cover to achieve a rain‑tight assembly where environmental protection is required.

• Set‑screw connection for attaching EMT conduit
• Use gasketed cover for rain‑tight installations
• Flat back facilitates mounting close to the structure

Before You Order

Confirm the Morris catalog number and trade size required for your installation before ordering. Verify whether a gasketed cover is included or must be purchased separately to meet rain‑tight requirements.

• Confirm model number 14144 and trade size 1-1/2"
• Confirm whether you need a gasketed cover for rain‑tight applications

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Morris 14144 Aluminum EMT Set Screw Conduit Body LB Type, 1-1/2". For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.