Lutron Skylark 3-Speed Fan Control 1.5 A, (SFSQ-F-AL)

Product Overview

The Lutron SFSQ-F-AL is a Skylark 3-speed wall-mounted fan control rated for 1.5 A at 120 V. It provides three discrete fan speeds with quiet electronics and installs without a neutral.

This SKU is finished in Almond and supports single-pole or 3-way wiring to control a ceiling fan from one or two locations.

Key Features

• Three discrete fan speeds (low, medium, high)
• Quiet electronic operation to minimize audible hum at low speeds
• No neutral required — fits into standard 2‑wire fan boxes
• Single-pole or 3‑way wiring for one- or two-location control
• Captive linear slide returns the fan to the last set speed

What this control does

The SFSQ-F-AL is a wall-mounted Skylark control that sets ceiling-fan speed using a captive linear slide with three discrete positions. It replaces pull-chain speed switching and returns the fan to the last-selected speed when re-engaged.

• Three discrete speeds: low, medium, high
• Captive slide returns to last set speed

Electrical rating and wiring

This model is rated for 1.5 A of ceiling-fan load at 120 V and supports single-pole or 3-way wiring configurations. No neutral conductor is required for installation.

• Rated load: 1.5 A at 120 V
• Wiring: Single-pole or 3-way control
• No neutral required — fits into existing 2‑wire fan boxes

Compatibility and installation considerations

Confirm compatibility before installation: the fan motor must accept an electronic speed control and the connected load must meet any minimum wattage required for no-neutral operation. Refer to the fan manufacturer's guidance or consult an electrician if unsure.

• Verify the fan motor is compatible with electronic speed controls
• Confirm the connected load meets any minimum wattage requirement for no-neutral models

Finish and model identification

This SKU, SFSQ-F-AL, is finished in Almond. Other finishes are available under separate SKUs; confirm the exact model number and finish when ordering.

• Model / SKU: SFSQ-F-AL
• Finish: Almond
• Series: Lutron Skylark

Before You Order

Confirm the model number and finish (SFSQ-F-AL — Almond) and verify the fan motor accepts an electronic speed control.

• Verify fan motor compatibility with electronic speed controls.
• Confirm connected load meets any minimum wattage requirement for no-neutral operation.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Skylark 3-Speed Fan Control 1.5 A, (SFSQ-F-AL). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.