Lutron Skylark 3-Wire Dimmer Switch 8 A, (SF-10P-AL)

Product Overview

The Lutron SF-10P-AL is a Skylark single‑pole dimmer switch intended for 3‑wire fluorescent ballast and LED‑driver loads. It is rated 8 A and supports up to 1000 W at 120 V. A neutral connection is required at the switch box.

This SKU is finished in Almond and mounts in a standard single‑gang wall box. The control provides a preset level to return lights to a chosen brightness.

Key Features

• Rated 8 A (1000 W at 120 V)
• For 3‑wire fluorescent ballast and LED‑driver loads
• Neutral required
• Preset level restores a chosen brightness
• Single‑pole configuration

What this dimmer controls

The SF-10P-AL is intended to control lighting driven by 3‑wire fluorescent ballasts and electronic LED drivers. It can be used with fixtures whose load type and total wattage are within the dimmer's rating.

• Designed for 3‑wire ballast and LED‑driver loads
• Use only with fixtures whose combined wattage does not exceed the dimmer rating

Electrical rating and wiring

The dimmer is rated for 8 A and 1000 W at 120 V and requires a neutral conductor at the switch box. Verify wiring and load totals before installation.

• Amperage: 8 A
• Maximum load: 1000 W at 120 V
• Wiring: 3‑wire configuration (ballast / LED‑driver)
• Neutral: required

Mounting and installation notes

The control mounts in a standard single‑gang wall box and is configured for single‑pole operation. The unit includes a preset level that returns lighting to a chosen brightness when switched on.

• Mounts in a single‑gang box
• Single‑pole configuration
• Preset returns lights to a chosen brightness

Model identity and finish

This page covers the specific SKU SF-10P-AL, part of the Lutron Skylark family. The finish for this SKU is Almond.

• Brand: Lutron
• Series: Skylark
• Model / SKU: SF-10P-AL
• Finish: Almond
• UPC: 27557691574

Before You Order

Verify the switch box has a neutral conductor and that the combined wattage of connected fixtures does not exceed 1000 W at 120 V for this SKU.

• Confirm neutral conductor is present in the switch box
• Match total connected wattage to the 1000 W rating
• This page describes the Almond finish SKU (SF-10P-AL) only

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Skylark 3-Wire Dimmer Switch 8 A, (SF-10P-AL). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.