Lutron Skylark 3-Wire Dimmer Switch 8 A, (SF-103P-AL)

Product Overview

The Lutron SF-103P-AL is a Skylark 3-wire dimmer switch in Almond finish. It is rated for 8 A on 120 V circuits, requires a neutral connection, and supports single-pole or 3-way wiring.

The catalog lists the control for use with 3-wire fluorescent ballasts and LED drivers and for dimming LED, halogen, or incandescent lighting when the connected fixtures and drivers match the dimmer's ratings.

Key Features

• Rated 8 A; rated for up to 1000 W dimmable load at 120 V
• 3-wire design listed for fluorescent ballast and LED-driver loads
• Neutral required (per product notes) to support improved low-end dimming
• Single-pole or 3-way wiring capability
• Preset returns lights to a preferred brightness
• Mounts in a standard single-gang wall box; Almond finish

What this dimmer controls

The catalog lists this model as suitable for dimming 3-wire fluorescent ballasts and LED drivers. It is also listed for use with dimmable LED, halogen, and incandescent lighting when the connected fixtures or drivers are compatible with the dimmer's ratings.

• Listed for 3-wire fluorescent ballast and LED-driver loads
• Listed for dimmable LED, halogen, and incandescent fixtures when matched to the dimmer's ratings

Electrical and load ratings

Operate the device only within the listed electrical limits.

• Amperage: 8 A
• Voltage: 120 V
• Maximum dimmable load: 1000 W (at 120 V)

Wiring, neutral, and multi-location use

A neutral conductor is required at the device location according to the product notes. The control supports single-pole or 3-way wiring for multi-location dimming configurations.

• 3-wire connection for ballast/LED-driver applications (as listed)
• Neutral required — indicated to support improved low-end dimming
• Can be wired for single-pole or 3-way operation

Finish and physical fit

This SKU ships in an Almond finish and is designed to mount in a standard single-gang wall box.

• Finish: Almond
• Mounts in single-gang wall box

Before You Order

Ensure a neutral conductor is present in the wall box and that the combined connected load does not exceed 1000 W at 120 V.

• Verify the total wattage on the circuit and that fixtures/drivers are compatible with this dimmer's ratings.
• Confirm the SF-103P-AL finish (Almond) and single-gang box fit.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Skylark 3-Wire Dimmer Switch 8 A, (SF-103P-AL). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.