Lutron Claro Switch 15 A, Biscuit (SC-3PSNL-BI)

Product Overview

The Lutron SC-3PSNL-BI is a Claro series mechanical wall switch rated for 15 A with single-pole or 3-way wiring. It fits a standard single-gang wall box and is finished in Biscuit.

Designed for residential lighting and fan loads, the switch features a large paddle actuator and is a genuine Lutron component intended for system-matched installations.

Key Features

• 15 A switching capacity
• Single-pole or 3-way configuration (controls one circuit from one or two locations)
• Large paddle actuator for a tactile on/off feel
• Claro series finish: Biscuit
• Designed for mounting in a standard single-gang wall box

What this switch does

Direct answer: The SC-3PSNL-BI provides manual on/off control of a single lighting or fan circuit and supports multi-location control when wired as a 3‑way switch.

The device uses a large paddle actuator to operate the internal mechanical switch, giving a clear tactile on/off feel appropriate for general lighting and fan loads.

• Controls one circuit from a single location (single-pole) or from two locations (3-way)
• Intended for mechanical on/off switching rather than dimming

Where to use it

Direct answer: Use this switch for residential lighting or fan applications in single-gang wall boxes where a Biscuit finish matches the decor.

Typical use cases include new-construction and replacement projects in homes, and where a system-matched Lutron Claro component is preferred.

• Switching lighting or fan loads in residential boxes
• Multi-location control with companion 3-way devices
• Replacement and new-construction wiring

Electrical rating and wiring

Direct answer: The SC-3PSNL-BI is rated for 15 A and supports single-pole or 3-way wiring configurations. Confirm the 15 A rating is appropriate for the intended load before installation.

The product description identifies the applicable configurations but does not provide circuit voltage or additional load-type limitations; verify compatibility with your circuit and local code requirements.

• Amperage: 15 A
• Pole/configuration: Single-pole / 3-way

Mounting and finish

Direct answer: The switch mounts in a standard single-gang wall box and is finished in Biscuit as part of Lutron’s Claro line.

Choose the Biscuit finish to match comparable Claro devices and wallplates for a consistent appearance.

• Mounting: single-gang wall box
• Finish: Biscuit (Claro series)

Before You Order

Confirm the model number (SC-3PSNL-BI), amperage (15 A), and finish (Biscuit) match the requirements for your installation before ordering.

• Verify 15 A rating is suitable for the intended load and circuit.
• Confirm whether single-pole or 3-way wiring is required for your application.
• Ensure finish (Biscuit) coordinates with existing devices and wallplates.

Ordering from Lumera Electric

Check the purchasing options shown on the Lumera Electric product page for Lutron Claro Switch 15 A, Biscuit (SC-3PSNL-BI). For project quantities or additional ordering requirements, use Request a Quote and provide the required quantity.